User manual SHARP LC65XS1E OPERATION MANUAL

[. . . ] 1 2 TV STB and VCR indicate that the buttons become available in respective operating mode when using as a universal (TV Standby/On) DVD STB VCR LIGHT When pressed, buttons that are frequently used (P / , / , 0­9 numeric buttons, and ) will light. The light will turn off if no operations are performed within about five seconds. This button is used for performing operations in low-light situations. 1 2 3 15 (INPUT SOURCE) Select an input source. 16 RADIO DTV/SAT: Switch between Radio and Data mode. · When only data broadcasting (no radio broadcasting) is transmitted by DVB, the radio broadcasting will be skipped. 3 FUNCTION DVD STB VCR Press this button briefly (for more than 0. 2 second), and the remote control switches for DVD, SetTopBox or VCR operation and currently controlled devices will be indicated in the LCD window. 4 17 SAT Press to access satellite mode. DVD STB VCR 18 P / Select the TV channel. 5 6 7 8 9 10 11 12 13 14 21 22 20 15 16 17 18 19 19 MENU DVD ATV/DTV/SAT: "MENU" screen on/off. [. . . ] STB mode: Only the button can be used to operate on STB. 6 7 8 9 10 11 R/G/Y/B (Colour) buttons The coloured buttons are correspondingly used to select the coloured items on the screen (e. g. 12 / / / (Cursor) DVD Select a desired item on the setting screen. OK DVD STB Execute a command within the "MENU" screen. ATV/DTV/SAT: Display the programme list when no other "MENU" screen is running. 13 END Exit the "MENU" screen. 14 Buttons for teletext and other useful features (Subtitle) Switch subtitle languages on/off. (Teletext) ATV: Display analogue teletext. DTV/SAT: Select MHEG-5 and teletext for DTV/SAT. GALLERY Press to enter the Gallery Mode. (Freeze/Hold) Press to freeze a moving image on the screen. Teletext: Stop updating teletext pages automatically or release the hold mode. 1­2 LC-52XS1E/RU/LC-65XS1E/RU Part name Display (Front view/Side view) 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 / Volume buttons* P/ Programme (channel) buttons* (INPUT SOURCE) button* MENU button* (Main Power) button* 6 7 8 9 10 11 Remote control sensor (Standby/On) indicator SLEEP indicator 11 OPC indicator RESET button * The symbols light up when pressing these buttons. After a USB terminal period of time, the light will turn off. AVC System (Front view/Rear view) 1 2 3 4 5 6 7 8 1 2 (Power) button (Standby/On) indicator 3 4 5 COMMON INTERFACE 1/2 slot RESET button HDMI3 (HDMI) terminal 6 7 8 EXT4 (ANALOGUE RGB/AUDIO) terminals EXT8 terminals Headphones WARNING · Excessive sound pressure from earphones and headphones can cause hearing loss. · Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. 11 9 10 12 13 14 15 16 9 EXT1 (RGB) terminal 10 EXT2 (RGB) terminal 11 EXT3 (COMPONENT/AUDIO) terminals 12 OUTPUT (AUDIO) terminals 13 14 15 16 17 17 18 19 20 21 18 19 20 21 22 22 SAT (satellite) antenna terminal Antenna terminal DC OUTPUT terminal DIGITAL AUDIO OUTPUT terminal HDMI1 (HDMI/AUDIO) terminals HDMI2 (HDMI) terminal RS-232C terminal USB terminal DISPLAY OUTPUT terminal AC INPUT terminal AVC System (Bottom view) Product label is on the bottom of the AVC System. 1­3 LC-52XS1E/RU/LC-65XS1E/RU Before turning on the main power Preparing the Display · Make sure the Display is turned off before beginning work. · Before performing work, spread cushioning over the surface on which you will be laying the Display. This will prevent it from being damaged. Connecting the HDMI cable with the HDMI cable holder HDMI cable (supplied) Speaker cable* HDMI cable holder (supplied) 1 Press down on the upper hook and remove the rear terminal cover, pulling towards you. 2 Connect the HDMI cable to the Display. 3 Affix the HDMI cable holder by pressing down. NOTE * These are terminals for the speaker of the TV. Do not connect any other kind of cables. · Do not disconnect the speaker cable unless absolutely necessary. If you disconnect the speaker cable, confirm each colour of the speaker plugs and speaker terminals (the order of the colour from left to right: red/black/white) before connecting the speaker cable again. Mounting the Display on a wall · This Display should be mounted on a wall only with the wall mount bracket available from SHARP. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. · Mounting the Display requires special skills and should only be performed by qualified service personnel. [. . . ] This can cause result in an error message appearing on the screen without a visible picture. Satellite antenna cable Standard DIN45325 plug (IEC 169-2) 75 coaxial cable Do not use excessive force when insering/ removing the HDMI cable. The terminal or cable may become dameged. Connecting the HDMI cable with the fixture/cushion HDMI cable (supplied) 1 3 4 5 2 Tab 1 Insert the fixture for the HDMI cable into the hole below the DISPLAY OUTPUT terminal on the AVC System. 2 Detach the parts of the fixture while holding the tab of the fixture downward. 3 Wrap the cushion around the HDMI cable. 4 Attach the parts of the fixture on the cushion, pushing the tab downward. 5 Connect the HDMI cable with the fixture to the DISPLAY OUTPUT terminal while sliding on the bar of the fixture. Handling the AVC System CAUTION · Do not put a VCR or other device on top of the AVC System. 5cm 5cm · Keep enough space above and to the sides of the AVC System. [. . . ]