User manual SHARP LL-173C

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Do not allow the monitor to come into contact with strong shocks or vibrations. causing the monitor to fall or topple over may damage it. - Do not use in places where the monitor will be subject to direct sunlight, near heating equipment or anywhere else where there is likelihood of high temperature, as this may lead to generation of excessive heat and outbreak of fire. The power cord - Do not damage the power cord, place heavy objects on it, stretch it, or over bend it. - Use only the power cord supplied with the monitor. 5 - Insert the power plug directly into the AC outlet. adding an extension cord may lead to fire as a result of overheating. - Do not remove or insert the power plug with wet hands. Doing so could result in electric shock. Monitor and accessory checklist - Please check that the following items are included in the package. - LCD monitor (1) - Base (1) - Power cord (1) - Analog signal cable (1) (model name: 0PD5301010011) - CD-ROM (1) - Start guide (1) Note: - Use only the cables supplied with the monitor. - Be careful not to allow your fingers to be pinched. - Check that the base is firmly installed before use. If the installation is not performed correctly, the monitor may fall down or the base may drop. This button is used to perform automatic adjustment of the screen (CLOCK, PHASE, H-POS, and V-POS). This button is used to pop-up, select, and close the On Screen Display (OSD) Menu. When the OSD Menu is displayed: This button is used to select menu options. When the OSD Menu is not displayed: This button is used to set DISPLAY MODE. These buttons are used to select an option or adjust the value of the selected option. When the OSD Menu is not displayed: These buttons are used to adjust backlight brightness. Pressing this button turns the power on. Press the button again to turn the power off. [. . . ] Turning the power off If the monitor is not going to be used for a long period of time, be sure to unplug it from the AC outlet. If the monitor will not be used for a long period of time, be sure to remove the power plug from the AC outlet. - Do not leave the monitor in contact with rubber or plastic items for long periods of time as this could lead to color change or change in shape. Model name LL-173C-B LCD display 17" TFT LCD module Actual display size 17. [. . . ]