User manual SHARP LL-193A/G

[. . . ] IMPORTANT: To aid in reporting in case of loss or theft, please record the monitor's model and serial numbers in the space provided. WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B computing equipment. [. . . ] Notes: - When setting up this monitor for the first time or after having changed the settings of the current system, perform an automatic screen adjustment before use. - Automatic screen adjustment is unnecessary when the LL-193G is used with a digital connection. Automatic adjustment can be performed using either the AUTO button or the MENU button. [ADJUSTING] will appear on the screen, and after a few seconds [ADJUSTING] will disappear. When you adjust with the ADJUSTMENT Menu or the GAIN CONTROL Menu, display an image that makes the entire screen display light colors beforehand. If you are using Windows, use the adjustment pattern on the supplied CD-ROM. opening the adjustment pattern (for Windows) 1. Load the supplied CD-ROM into the CD-ROM drive of the computer. After a few seconds the ADJUSTMENT Menu will return. Press the MENU button 5 times to make the OSD (On Screen Display) Menu disappear. notes: - In most cases automatic adjustment is sufficient. - It may not be possible to achieve correct adjustment with the first automatic adjustment. in such a case , try repeating the automatic adjustment 2 or 3 times. - If necessary due to any of the following, manual adjustments (p. 22) can be performed after the automatic adjustment. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the adjustment pattern or try displaying an image that makes the entire screen display light colors. ) - Automatic adjustment may not be achieved correctly depending on what is displayed on the screen - moving pictures or the MS-DOS prompt etc. After completing the adjustments, press the computer's [Esc] key to exit the adjustment program. Note: - If your computer's display mode is set to 65K colors, you may see the different color levels in each color pattern or the gray scale may look colored. When you adjust with the ADJUSTMENT Menu or the GAIN CONTROL Menu, display an image that makes the entire screen display light colors beforehand. When the LL-193G is used with a digital connection, this menu adjustment is not necessary. [. . . ] Screw used to attach arm Arm Part of monitor to which arm is attached Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Klicken Sie auf [Display a list of all the drivers in a specific location, so you can select the driver you want. Aktivieren Sie [Display a list of the known drivers for this device so that I can choose a specific driver], und klicken Sie auf [Next]. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. [. . . ]