User manual SHARP LL-T1511A/1501A

[. . . ] 10 Connecting the monitor and turning the monitor on and off . WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] If necessary due to any of the following, manual adjustments (p. 18) can be performed after the automatic adjustment. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the Adjustment Pattern or try displaying an image that makes the entire screen very bright. For LL-T1511A, pushing the BRIGHT button can also make the Adjustment (OSD) Menu disappear. When setting up this monitor for the first time or after having changed an aspect of the current system, perform an automatic screen adjustment before use. First display an image that makes the entire screen very bright. If you are using Windows, you can use the Adjustment Pattern on the accompanying Monitor Settings Adjustment Disk (p. After a few seconds the ADJUSTMENT Menu will return. Press the MENU button four times to make the Adjustment (OSD) Menu disappear. Opening the Adjustment Pattern (for Windows) If you are using Windows, you can use the Adjustment Pattern on the accompanying Monitor Settings Adjustment Disk. Adjusting the backlight brightness For LL-T1511A Adjustments can be made in the following ways: · Fine adjustment For LL-T1501A Adjustments can be made in the following way: · fine adjustment Adjusting the backlight according to surroundings (LL-T1511A only. ) The backlight brightness can be set to change automatically for use in different surroundings. Carry out the commands without the On Screen Display (OSD) Menu displayed. if the OSD Menu is displayed , press the BRIGHT button. (You can also make it disappear by pressing the MENU button a number of times. Without the OSD Menu being displayed, push the BRIGHT button. If [AUTO] is not selected, press the BRIGHT button a number of times until [AUTO] is selected. After completing the adjustments, press the computer's [Esc] key to exit the Adjustment Program. If the floppy disk drive of your computer is not "A drive", please read the below substituting the floppy disk drive you are using in place of "A drive" or "A". If your computer's display mode is set to 65K colors, you may see the different color levels in each color pattern or the gray scale may look colored. You can also change the brightness of a backlight that has been set according to the current surroundings. [. . . ] Aktivieren Sie [Display a list of the known drivers for this device so that I can choose a specific driver], und klicken Sie auf [Next]. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. [. . . ]