User manual SHARP LL-T15S3

[. . . ] This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. IMPORTANT The wires in this mains lead are coloured in accordance with the following code : GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: · The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] Click on [General] and from [Compatibility] select [Apply the new display setting without restarting], then click on [Color Management]. Choose the color profile that you would like to install, and click on [Add]. Connecting the monitor and turning the monitor on and off About the ColorSync profile ColorSync is the Apple Corporation's color management system and is a function that enables color resolution to be realized when used with a compatible application. In addition, it is necessary to have PC Exchange or File Exchange installed in your system. - Depending on the type of computer or OS, command names and methods may differ. Please follow the computer's own operation manual while reading this. Copy the profile to be used from the Mac folder on the Utility Disk to the ColorSync profile folder located within the system folder. Using the ColorSync on the control panel, choose the profile to be used. 18) Fine adjustments can be made using the On Screen Display (OSD) Menu. Note: - All adjustments will be saved even after turning the power off. Setting the lock) any attempted changes to adjusted values will be voided. While pressing the MENU button, press the power button (i. [ADJUSTMENT LOCKED] will appear on the screen , and the lock will be set. Note: - When the lock is in place, all buttons other than the power button are disabled. While pressing the MENU button, press the power button (i. All adjustment values can be returned to their original ex-factory values in one command. Press the MENU button and the / MODE button simultaneously, and while doing this press the power button (i. - It is not possible to reset values when the adjustment lock is in place. Without the OSD Menu being displayed, press the or the button. Note: - On Screen display for adjustment disappears several seconds after the last operation. Settings of items in the ADJUSTMENT Menu (CLOCK, PHASE, H-POS, V-POS) can be returned to their original ex-factory values. Note: - It is not possible to reset values when the adjustment lock is in place. [. . . ] Bei dieser Beschreibung wird als a specific location, so you can select the driver Laufwerksbuchstabe für das Diskettenlaufwerk you want. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Aktivieren Sie [Display a list of all the drivers in a specific location, so you can select the driver you want. Klicken Sie auf [General], und wählen Sie unter [Compatibility] die Option [Apply the new display setting without restarting]. [. . . ]