User manual SHARP LL-T1820H/B

[. . . ] 11 Connecting the monitor and turning the monitor on and off . WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] (In such case , [OUT OF ADJUST] will appear and setting values remain unchanged. ) - If the signal coming from the computer is composite sync or sync on green, automatic adjustment cannot be performed. please perform manual adjustment instead. BLACK LEVEL Total screen brightness can be adjusted while buttons) watching the color pattern. Notes: - To choose a menu option:SELECT button - To go to the next menu: MENU button COLOR MODE Color tone can be set as below. Displays image with the color tone results from original scheme of liquid crystal panel. Color conversion is made in taking account of liquid crystal's characteristics and represents color tone close to it original image. Subsequent items can be set when the [COLOR MODE] is [STD]. CONTRAST While watching the color pattern, adjustments can be buttons) made so that all graduations appear. Notes: - On settings other than [STD] not all graduations can be displayed. - Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [BCONTRAST], in order to make fine adjustments. Button for yellow button for blue GAMMA Adjust so that dark and bright images are easy to see. if the screen is dark and hard to see , increase the numerical value. If it is bright and hard to see, buttons) lower the numerical value. Notes: - Depending on the resolution of the input signal, even if menu options can be selected, the display may not change. - To choose a menu option: SELECT button - When adjustment complete: MENU button OSD H-POSITION (OSD horizontal position) The position of the OSD display can be moved to the buttons) left and right. ( OSD V-POSITION (OSD vertical position) The position of the OSD display can be moved up buttons) and down. ( OSD PIVOT The orientation of the OSD display can be changed. Buttons) ( ON: Orientation for long height display OFF: Orientation for long width display 400 LINES (degree of resolution) You can specify the horizontal resolution of a 400buttons) line screen when using US text, etc. ( 640: 640 X 400 dot mode 720: 720 X 400 dot mode (US text etc. ) Note: - As the resolution input for other than 400 lines is done automatically, there is no need to set it. sCALING (Level of scaling) Adjusts the image to optimum sharpness when buttons) Screen expansion is taken. [. . . ] This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Cocher la case [Display a list of all the drivers in a specific location, so you can select the driver you want. Cocher la case [Display a list of all the drivers in a specific location, so you can select the driver you want. Cocher la case [Display a list of the known drivers for this device so that I can choose a specific driver] et cliquer sur [Next]. [. . . ]