User manual SHARP MD-S301

[. . . ] PORTABLE MINIDISC PLAYER MODEL MD-S301 OPERATION MANUAL MD-MS200-HYOSHI INTRODUCTION Thank you for purchasing this SHARP product. To obtain the best performance from this product please read this manual carefully. It will guide you in operating your SHARP product. CONTENTS Page ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To skip a number of tracks at one time, press the or (4) button repeatedly until the desired track number is shown. To begin playback at a desired track, press the or button while in the stop mode to select the track number. Note: q When the first track is selected and the button is pressed, the last track on the disc will be located. When the last track is selected and the (4) button is pressed, the first track will be located. 5 0/4 54 0/4 5 0/4 10 MD-S301 s Random play or repeat play (Remote control) PLAY MODE During playback or while in the stop mode, press the PLAY MODE button repeatedly to select the playback mode. RANDOM . . . . Repeat play of all of the tracks . . . . . . . Repeat play of a single track No display . . . Normal playback q If the playback mode is selected while stopped, press the button to start playback. 06 1 Notes: q In random play the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) After all of the tracks have been played once each in random order, the unit will stop automatically. q During random play or repeat play of a single track, cue and review of the previous or next tracks are not possible. q During random play, the unit cannot find the beginning of any track which has been played. 11 MD-S301 DISPLAY s To check the elapsed time and remaining time of the track (Remote control) During playback, press the DISPLAY button. q Each time the button is pressed, the display will change as follows: Track name s To check the total playing time (Remote control) While in the stop mode, press the DISPLAY button. q Each time the button is pressed, the display will change as follows: Elapsed playback time Remaining play time Disc name TOTAL Total playing time TOTAL To check individual track names one by one: Press the or button while in the stop mode. Each time the button is pressed, the name of the previous or next track will be displayed. Note: q The display of elapsed time during playback may be different from the actual time on a clock. 54 Note: If character information was not originally recorded on the MiniDisc, nothing will be displayed. 12 MD-S301 CONVENIENT OPERATION OF THE UNIT s Checking the remaining amount of battery charge The remaining amount of battery charge is shown by the battery indicator ( ) on the remote control display during operation. Battery indicator s To prevent the unit from being operated by mistake To avoid operations being started by accidentally pressing the buttons, use the hold function. Move the HOLD switch to the safety position (direction indicated by the arrow). q When the unit is in the safety mode, pressing the buttons will have no effect. LD HO How to read the battery indicator When the battery is completely charged Charging is needed. q When the battery is completely discharged, the whole battery indicator will flash. Recharge the battery or replace the alkaline battery with a new one. q When the battery has completely run out, "Lo BATT" will appear in the display. Then, the power will be disconnected automatically. Notes: q When the AC adaptor included with this unit or an optionally available car adaptor is used, the battery indicator will not be shown. q The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. q When the rechargeable battery and the alkaline battery are used at the same time, the rechargeable battery is used first, and then the alkaline battery. [. . . ] 400 ­ 900 rpm ACIRC (Advanced Cross Interleave Reed-Solomon Code) ATRAC (Adaptive TRansform Acoustic Coding) 1 bit 44. 1 kHz EFM (Eight to Fourteen Modulation) Unmeasurable (less than ±0. 001% W. peak) 21 MD-S301 MEMO LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to misuse, abnormal service or handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. [. . . ]