User manual SHARP MD-X5

[. . . ] MD/CD STEREO MODEL MD-X5 OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product please read this manual carefully. It will guide you in operating your SHARP product. MD-X5 MD/CD stereo consisting of MD-X5 MD/CD stereo CP-X5 2 way speaker system. A0004 CONTENTS Page RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To record the results, select another input or turn the power off. During writing, the "TOC" display will flash. Once the "TOC" goes out, all editing has been recorded to the disc. Note: I Storing the edited contents on the disc can be done after several pieces of editing have been finished. Flashing during recording 21 *01-21 21 98. 6. 23, 10:09 AM (Continued) H Divide 1 1 2 3, 4 2 Play the track which you wish to divide into two and press the MD 06 button at the point where you wish to divide the track. Press the NAME/TOC EDIT button, and then select "DIVIDE" using the v or w button. 2 3 4 Within 10 seconds, press the ENTER button. I To cancel the operation, press the MD H button. I The tracks are divided, and the unit is stopped at the beginning of the second of the two tracks. I The numbers of the tracks which come after the divided track are automatically increased by one. Note: I When a track which has been given a name is divided, the two new tracks will have the same name and date. If the "TOC FULL" message is displayed, the second track may not be given a name. 1 2 3 4 H Combine 1 2 3, 4 2 1 While in the stop mode, select the second of the two tracks you wish to combine using the 5 or 4 button. I Start playing the second of the two tracks you wish to combine, and then press the MD 06 button. 2 3 4 Press the NAME/TOC EDIT button, and then select "COMBINE" using the v or w button. . Within 10 seconds, press the ENTER button. I To cancel the operation, press the MD H button. I The two tracks are combined, and the unit is stopped at the beginning of the combined track. I The numbers assigned to the tracks following the combined track are automatically decreased by one. 1 2 3 4 When both tracks have a name: I When only the first track has a name That name will be used. I When only the second of the two tracks has a name That name will be used. I When both tracks have a name The name of the first track will be used. To combine two noncontiguous tracks: (Example: the first and third tracks) Move the third track to the second track using the MOVE function. (Page 23) Then, combine the first and second tracks using the COMBINE function. Notes: I Tracks recorded from analog inputs cannot be combined with tracks recorded from CDs or MDs using the digital inputs. I Tracks recorded in the stereo mode cannot be combined with tracks recorded in the monaural long-play mode. I Tracks where either track's recording time is less than 15 seconds may not be combined. 22 *22-34 22 98. 6. 23, 10:10 AM (Continued) H Move 1 1, 4 2 3, 5 2 While in the stop mode, select the track you wish to move using the 5 or 4 button. I Start playing the track to be moved, and then press the MD 06 button. 2 3 4 Press the NAME/TOC EDIT button, and then select "MOVE" using the v or w button. Within 10 seconds, press the ENTER button. Select the direction to move the track using the 5 or 4 button. 5 I To cancel the operation, press the MD H button. I The track is moved, and the unit is stopped at the beginning of the track. [. . . ] (2. 2 kg)/each (Compact disc player) Type: Signal readout: Rotational speed: Error correction: Quantization: D/A converter: Filter: Frequency response: Signal/noise ratio: Dynamic range: Wow and flutter: Compact disc player Non-contact, 3-beam semi-conductor laser pickup 200 - 500 rpm CLV, Approx. CIRC (Cross Interleave ReedSolomon Code) 16-bit linear 1-bit 4-times oversampling digital filter 20 - 20, 000 Hz 95 dB (1 kHz) 90 dB (1 kHz) Unmeasurable (less than 0. 001% W. peak) (Tuner section) Frequency range: Sensitivity: FM; 87. 5 - 108 MHz AM; 530 - 1, 720 kHz FM; 8. 0 µV (75 ohms, unbalanced) AM; 650 µV/m 41 *35-40 41 98. 6. 23, 10:11 AM MEMO 42 *35-40 42 98. 6. 23, 10:11 AM CALLING FOR SERVICE For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies or customer assistance, please call 1-800-BE SHARP. LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to misuse, abnormal service or handling, or which has been altered or modified in design or construction. [. . . ]