User manual SHARP MD-MT180

[. . . ] GRABADOR/REPRODUCTOR MINIDISC PORTTIL BRBAR MINISKIVINSPELARE GRAVADOR PORTTIL DE MINIDISCO PORTABLE MINIDISC RECORDER MODELO MODELL MODELO MODEL MD-MT180H MANUAL DE MANEJO BRUKSANVISNING MANUAL DE OPERAO OPERATION MANUAL ESPAOL SVENSKA PORTUGUS ENGLISH Consulte las pginas i al vi y S-1 al S-42. Hnvisa till sidorna i till vi och V-1 till V-42. Favor consultar as pginas i a vi e E-1 a E-42. Please refer to pages i to vi and E-1 to E-42. for SEES TINSZ0781AWZZ MD-MT180H ENGLISH Introduction Thank you for purchasing this SHARP product. [. . . ] A series of tracks can be recorded as one by disabling the auto marker function (see page 22). Useful Features -Advanced Recording- About 1 second Silence First track Second track When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. Track numbers may not be created properly, depending on the connected stereo system. About sampling rate converter This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape recorders. Note for digital recording 2. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function). You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected. Digital signals Digitally recorded MiniDisc Cannot record Playback side Recording side First track Track A First track Track A Second track Third track Track B Track C Second track Third track Track C Track B CD player, MiniDisc player, etc. Digital connection Digital connection Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise. The track numbers on the playback side may not match the track numbers recorded on the MiniDisc. E-23 01/10/5 180H_E_4. fm Checking Displays To check the elapsed time and remaining time of the track During playback, press the MENU/CHRG button repeatedly to select "DISPLAY". Each time the button is pressed, the display will change as follows. MD-MT180H ENGLISH To check the remaining recording time and the total playing time Whilst in the stop mode, press the MENU/CHRG button repeatedly to select "DISPLAY". Each time the button is pressed, the display will change as follows. 1 2 3 1 2 3 Useful Features A B A B D Elapsed playback time Remaining playback time C Track number Track name Notes: If the disc name or the track name was not originally recorded on the MiniDisc, "NO NAME" will be displayed. Elapsed playback time and remaining playback time may be different from the actual time. The selected display will not change even after the disc is replaced. Complete the operation within 7 seconds whilst selecting the menus. C Total number of tracks Disc name D Remaining recording time Total playing time Remaining recording time varies depending on the set recording mode. Remaining recording time will not be displayed with a playback only MiniDisc. E-24 01/10/5 180H_E_4. fm -Checking Displays- MD-MT180H Checking Displays (continued) ENGLISH To display the playing time of an individual track Whilst in the stop mode, press the or button to display the track number and track name. Track number Track name Checking the remaining amount of battery level 1 The remaining amount of battery level is shown by the battery indicator ( ) during operation. How to read the battery indicator Useful Features -Checking Displays- 2 3 4 Press the MENU/CHRG button repeatedly to select "DISPLAY". Press the MENU/CHRG button to select the playing time. When the battery level is high When the battery level is very low Playing time Each time the or button is pressed, the playing time of the previous or next track will be displayed. When the battery is completely discharged, the battery indicator will flash. When the battery has run out completely, "BATT EMPTY" will appear. Then, the power will be disconnected automatically. Notes: If you use the battery which you stopped charging halfway, " " may appear. It does not mean that the battery is completely charged. The battery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on. When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. [. . . ] When the unit is excessively dirty, use a soft cloth dampened in water (external surfaces only). Clean the plugs and the connecting sockets. If the plugs or sockets are dirty, noise may be heard. Cleaning will prevent noise. Moisture condensation Caution: Do not use chemicals for cleaning (petrol, paint thinner, etc. ). [. . . ]