Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP MD-MT190. We hope that this SHARP MD-MT190 user guide will be useful to you.
Lastmanuals help download the user guide SHARP MD-MT190.
Detailed instructions for use are in the User's Guide.
[. . . ] When in the recording mode, the recorded contents will be erased, and the power may be disconnected. q Do not replace the battery or the rechargeable battery during operation. q Do not use a rechargeable battery (nickel-cadmium battery etc. ) in the battery case. [. . . ] SYMPTOM "DISC FULL" or "TOC FULL" appears even though the MiniDisc still has recording time left. The remaining recording time does not increase even though you erased tracks. The total of the recorded time and the remaining time does not match the maximum recordable time. LIMITATIONS More than 255 tracks (maximum) cannot be recorded regardless of the recording time. If the MiniDisc is recorded or edited repeatedly or if it has scratches (recording skips scratched parts), you may not be able to record the maximum tracks above. The unit does not count non-recorded portions that last 12 or fewer seconds to display the remaining recording time. The time may not increase even if you erase short tracks. One cluster (approximately 2 seconds) is the minimum unit for recording. For example, a 3-second track uses 2 clusters (approximately 4 seconds). Therefore, the actual recordable time may be shorter than the displayed time. (The number of seconds indicates that in the stereo recording mode (SP). It varies depending on the recording mode. ) Combine function does not work. A track number is created in the middle of a track. A MiniDisc on which recording and editing are repeated may not allow the combine function. If one track is divided and recorded in separate places on a repeatedly recorded or edited MiniDisc, sound may skip. A track number may be created if there are scratches or dust on the MiniDisc.
Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician. [. . . ] 7 Press the MENU/CHRG button repeatedly to select recording mode. 8 Press the ENTER/SYNC button.
The mode will be set automatically after 7 seconds even if the ENTER/SYNC button is not pressed.
1 Press the REC button.
Record pause mode is entered.
9 Press the 06 button to start the MiniDisc unit recording. 10 Begin playback on the stereo system, the output will be recorded.
To stop recording Press the s :OFF/HOLD button.
q
2 Begin playback on the stereo system connected to this portable MD.
To enable the record level to be set.
3 Press the REC LEVEL 5 or 4 button to adjust the recording level.
Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between 4 dB and 0 dB. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP MD-MT190
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP MD-MT190 will begin.
