User manual SHARP MX-M550N

[. . . ] MODEL MX-M550U MX-M620U MX-M700U MX-M550N MX-M620N MX-M700N DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL (for general information and copier operation) Page PART 1: GENERAL INFORMATION BEFORE USING THE PRODUCT MANAGING THE MACHINE PERIPHERAL DEVICES PART 2: COPIER OPERATION 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 MAKING COPIES CONVENIENT COPY FUNCTIONS MACHINE MAINTENANCE (FOR COPYING) DOCUMENT FILING FUNCTION SPECIFICATIONS Be sure to become thoroughly familiar with this manual to gain the maximum benefi t from the product . Before installin g this product, be sure to read the installatio n requirement s and caution s sections . Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual (for general information and copier operation)" and operation manuals for any optiona l equipmen t which has been installed . Each instruction also covers the optional units used with these products. In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. [. . . ] Scan the originals starting from the first page of set A. Scan set B next, taking care to keep the correct page order. To display the special modes screen. . . See "General procedure for using special functions" on page 5-2. that is 4 Make sureselect the desired paper size or selected, the number of copies other copy settings, and [START] key. press the 1 Touch the [JOB BUILD] key on the special modes screen. ES DUAL COP TANDE COPY N SHIFT ERASE LET COPY JOB BUILD The [JOB BUILD] key will be highlighted to indicate that the function is turned on, and the job build icon ( ) will appear in the upper left of the screen. 2 Touch the [OK] key on the special modes screen. OK Return to the main screen of copy mode. Scanning of originals will start. After scanning of the first set of originals (A in the example above) is completed, remove the scanned originals, place the next set of originals (set B in the example) and press the [START] key. Repeat this operation until all sets of originals have been scanned. If you wish to adjust the copy settings each time you place a set of originals, see "Changing the copy settings for each set of originals" on the next page. 1/3 RASE DUAL PAGE COPY TANDEM COPY 5 Touch the [READ-END] key. INTERRUPT ES ORIGINAL A4 JOB BUILD PLACE NEXT ORIGINAL. TO CHANGE COPY SETTINGS, PRESS [CHANGE]. CHANGE READ-END A3 3 Place the first set of originals in the document feeder tray. (page 4-3) 4. C To cancel the job build function, touch the [JOB BUILD] key on the special modes screen (step 1). The highlighted display will be cancelled. 5-8 SPECIAL MODES Changing the copy settings for each set of originals When using job build mode, you can change the copy settings each time you place a set of originals. After performing step 4 on page 5-8, follow the steps below. 5 Touch the [CHANGE] key. INTERRUPT ES ORIGINAL A4 7 Touch the [READ-END] key. INTERRUPT ES ORIGINAL A4 PLACE NEXT ORIGINAL. TO CHANGE COPY SETTINGS, PRESS [CHANGE]. CHANGE READ-END A3 PLACE NEXT ORIGINAL. TO CHANGE COPY SETTINGS, PRESS [CHANGE]. CHANGE READ-END A3 4. 4. C C settings in the 6 Select the desired copyand press the screen that appears [START] key. [START]. INTERRUPT ORIGINAL A4 READ-END AUTO EXPOSURE AUTO A4 PAPER SELECT 100% COPY RATIO A4 1. A4 2. B5 B4 A3 5. A4 3. 4. The copy settings that can be selected are "EXPOSURE", "PAPER SELECT", and "COPY RATIO". If you touch the [READEND] key now, copying will begin without scanning the new set of originals. 5 NOTES If the original size was set manually at the beginning of the job build procedure, it will not be possible to change the original size setting. If the automatic original detection function is operating, the original size will be detected for each set of originals placed. When the bypass tray is selected, it is not possible to change the paper type. If "XY ZOOM" was initially set for the ratio, it will not be possible to change the ratio setting. [. . . ] 6-3 -Document filing function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31 -Finisher/saddle stitch finisher. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 -General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32 to 2-34 -Inserter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]