User manual SHARP MX-NB12

[. . . ] MODEL MX-NB12 NETWORK EXPANSION KIT OPERATION GUIDE INTRODUCTION The optional Network expansion kit (MX-NB12) enables the machine to be used as a network printer and a network scanner. Note · This manual refers to the digital multifunction device equipped with the network function as "the machine". · This manual only explains features that can be used when the optional Network expansion kit is installed. For information on loading paper, replacing toner cartridges, clearing paper misfeeds, handling peripheral devices, and other copier-related information, please refer to the Operation Guide for the machine. · The machine's default settings and default settings for the printer function can be changed using the system settings. [. . . ] The direction of opening of the pamphlet can be selected with the "Right Turning Pamphlet" checkbox in the "Advanced" tab. The following examples show how 8 pages are printed when "Titled Pamphlet" is selected. Printing result Right Turning Pamphlet Right Turning Pamphlet Print data Note · Only letter, invoice, A4 and A5 size paper can be used for pamphlet style printing. · Because four pages are printed on each sheet of paper, blank pages are automatically added at the end when the total number of pages is not a multiple of four. · When "Titled Pamphlet" is selected, printing will take place on paper that is twice the size of the paper size specified in the application. · When "2-Up Pamphlet" is selected, each page is reduced in the same way as for 2-Up and printed on the size of paper that is specified in the application. - 24 - PRINTING MULTIPLE PAGES ON ONE PAGE This feature allows you to reduce and print two, four, six, eight or sixteen document pages on a single sheet of paper. To use this function, open the printer driver setup screen and select the number of pages per sheet (2-Up, 4-Up, 6-Up, 8-Up, 9-Up, or 16-Up) in "N-Up Printing" in the "Main" tab. The order of the pages can be changed in the "Order" menu. See "BASIC PRINTING" (p. 19) for details on how to open the printer driver. Note The "N-Up Printing" setting is not available when "Fit To Paper Size" is selected. "FITTING THE PRINTED IMAGE TO THE PAPER" (p. 26) For example, when "2-Up" or "4-Up" is selected, the result will be as follows depending on the selected order. N-Up Left to Right Right to Left [2-Up] N-Up Right , and Down Down , and Right Left , and Down Down , and Left [4-Up] If you select the "Border" checkbox, borderlines will be printed around each page. Note Examples for 2-Up and 4-Up are shown here. The order of 6-Up, 8-Up, 9-Up, and 16-Up is the same as 4-Up. The order can be viewed in the print setting image in the printer driver setup screen. "PRINTER DRIVER SETTINGS" (p. 22) - 25 - FITTING THE PRINTED IMAGE TO THE PAPER The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine. Follow the steps shown below to use this function. The explanation below assumes that you intend to print A4 (letter) size document onto B5 (invoice) size paper. See "BASIC PRINTING" (p. 19) for details on how to open the printer driver. Note The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected. "PRINTING MULTIPLE PAGES ON ONE PAGE" (p. 25) 1 2 3 Click the "Paper" tab in the printer driver setup screen. Select the original size (A4 (letter)) of the print image in "Paper Size". Check the "Fit To Paper Size" button. 4 Select the actual size of paper to be used for printing (B5 (invoice)). The size of the printed image will be automatically adjusted to match the paper loaded in the machine. Paper Size: A4 (letter) Fit To Paper Size: B5 (invoice) A4 or Letter size document (Paper Size) B5 or Invoice size paper (Fit To Paper Size) - 26 - ROTATING THE PRINT IMAGE 180 DEGREES The print image can be rotated 180 degrees. This feature rotates the print image 180 degrees to enable correct printing on paper that can only be loaded in one orientation. [. . . ] If the "Fit To Paper Size" setting is activated, make sure that the paper size selected from the drop-down list is the same as the size of the loaded paper. The printed image is skewed or it runs off the paper. ­ The orientation of document setting is not correct. Click the "Main" tab in the printer driver setup screen, and verify if the "Image Orientation" option is set to your requirements. ­ Operation Guide ­ Paper is not loaded properly. Make sure the paper is properly loaded. The margins are not set correctly in the application. Check the paper size and margin settings in the application. Also make sure that the print settings are correct for the paper size. The selected "Scan Size" setting is smaller than the actual original size. The scanned image is clipped. Set the scan size to the actual original size and make sure that the original is placed in the correct orientation. [. . . ]