User manual SHARP MX-PB12

[. . . ] Book 1 ページ ２００９年７月７日　火曜日　午後２時８分 For users in the USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] € The PS3 expansion kit is required to use the PS printer driver or the PPD driver. When the installation completed screen appears, click the [OK] button. Click the [Close] button in the window of step 1. Note 11 6 Select whether or not you wish the printer to be your default printer and click the [Next] button. If you are installing multiple drivers, select the printer driver to be used as the default printer. If you do not wish to set one of the printer drivers as the default printer, select [No]. After the installation, a message prompting you to restart your computer may appear. If this message appears, click the [Yes] button to restart your computer. 7 When the printer name window appears, click the [Next] button. If you wish to change the printer name, enter the desired name. 8 When you are asked if you wish to install the display fonts, select [No] and click the [Next] button. When the PC-Fax driver is being installed, this screen does not appear. € After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE" (page 24) to configure the printer driver settings. € Make sure that the port of the installed driver is the same as the port used by the PCL6 printer driver. The port used by the printer driver of the machine is indicated by a checkmark on the [Ports] tab of the printer driver properties window. € If you installed the PS printer driver or the PPD driver, the PS display fonts can be installed from the "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit. Book 22 ページ ２００９年７月７日　火曜日　午後２時８分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER USING THE MACHINE AS A SHARED PRINTER If you are going to use the machine as a shared printer on a Windows network with the printer driver or the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the PC-Fax driver on the client computers. Note • Ask your network administrator for the server name and printer name of the machine on the network. € For the procedure for configuring settings on the print server, see the operation manual or the Help file of the operating system. The "print server" explained here is a computer that is connected directly to the machine, and "clients" are other computers connected to the same network as the print server. € Install the same printer driver on client computers as the printer driver that is installed on the print server. When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below. [. . . ] 1 Click the [start] button and then click [Control Panel]. in Windows 2000 , click the [Start] button , point to [Settings] , and click [Control Panel]. 4 Check the settings in "What action do you want Windows to take?3 Click the [Hardware] tab and then the [Driver Signing] button. [. . . ]