User manual SHARP PA-4000

[. . . ] Do not use the product in the bath, in locations where it is exposed to rain, or in excessively humid places. Doing so could result in fire, damage or malfunction. Do not place the product in excessively cold locations or near an open flame. Doing so could result in fire or damage. [. . . ] Press the STOP/MENU button once or twice to display the menu screen. Press the L (+) or M (-) cursor button until the "SPEED" (playback speed settings) screen appears, then press the OK button. Repeat playback Event marking repeat This function repeatedly plays back a section between 2 event marking numbers in the recording currently playing. Press the FOLDER/REPEAT button during playback to repeatedly play back the section between event marking numbers. File repeat This function repeatedly plays back the file currently playing. To repeatedly play back the entire file, hold down the FOLDER/ REPEAT button for 1 second or longer during playback. Cancel repeat To return to normal playback, press the FOLDER/REPEAT button during repeat playback. Skip/Search File skip You can skip to the previous or next file by briefly pressing the 1 (SKIP/SEARCH 5) or 0 (SKIP/SEARCH 4) cursor button. If the current file contains event marking numbers, this procedure skips to the previous or next event marking number. mode status Stopped SKIP/SEARCH button pressed 5 or 4 Result Displays the previous or next file number. If the current recording contains event marking numbers, the previous or next event marking number is displayed. If you are happy with the recording, press the OK button. â· To redo the recording, press the L (+) cursor button to return to the RECORD screen selected in step 4. Use the same procedure to select the minutes setting and then press the OK button. The "DAILY" setting plays the alarm message every day. To use a message recorded earlier, use the L (+) or M (-) cursor button after step 4 to select "RECALL" and then press the OK button. Messages are recorded with the microphone sensitivity set to "LOW" and "HQ" selected as the recording mode. â· If the set time is reached while you are playing a recording, playback stops and the recorder plays the message alarm. â· If the set time is reached while you are making a recording, the message alarm icon flashes on the display but recording is not interrupted. â· If the set time is reached while the digital voice recorder is connected to a personal computer, the message alarm icon flashes on the display. The recorder plays the message alarm as soon as it is disconnected from the personal computer. Using an alarm tone To have the recorder sound an alarm tone, select "CHIME" in step 4 and then set the alarm time. [. . . ] Cleaning the recorder Use a soft dry cloth to clean the recorder. Do not use volatile fluids such as thinners or benzene or a dampened cloth as this could result in deformation or discoloration of the recorder. If the problems described below occur, it does not necessarily mean that the recorder is faulty. Are the batteries inserted with the correct polarity? [. . . ]