User manual SHARP PG-A10S-SL DATASHEET

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SHARP PG-A10S-SL. We hope that this SHARP PG-A10S-SL user guide will be useful to you.

Lastmanuals help download the user guide SHARP PG-A10S-SL.

Download

Manual abstract: user guide SHARP PG-A10S-SLDATASHEET

Detailed instructions for use are in the User's Guide.

 [. . . ] Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied,  cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner.  [. . . ] · For details on the menus,  see the tree charts on pages 30 and 31. -32

3

Press ' or " to select the item you want to adjust. 
· The selected item is highlighted. 

Note
· To display a single adjustment item,  press after selecting the item. Only the selected adjustment item will be displayed. Then if you press ' or ",  the following item ("Red" after "Bright") will be displayed. to return to the previous

4

Press \ or | to adjust the item selected. 
· The adjustment is stored. 

Basic Operation

5

Press

. 

· The menu screen will disappear. 

-33

Using the Menu Screen

Menu Selections
(Settings)

1

Press

. 

· The "Picture" menu screen for the selected input mode is displayed. 

ENTER button UNDO button

MENU button ',  ",  \,  | buttons

Note
· The on-screen display shown on the right is displayed when INPUT 1 (RGB) mode is selected. 

Menu icons

2

Press \ or | to display the other menu screens. 
· The menu icon for the selected menu screen is highlighted. 
Menu icon Menu screen Picture Fine Sync Options Language PRJ Mode

Note
· The "Fine Sync" menu is not available for INPUT 2 or 3. · For details on the menus,  see the tree charts on pages 30 and 31. 

-34

3

Press ' or " to select the item you want to set,  and then press | to display the sub menu. 
· The selected item is highlighted. 

Note
· Press or \ to return to the previous screen. · For some items,  press \ or | to se". lect the icon using "

Sub menu

4

Press ' or " to select the setting of the item displayed in the sub menu. 

Basic Operation

5 6

Press

. 

· The selected item is set. 

Press

. 

· The menu screen will disappear. 

-35

Picture Adjustment
You can adjust the projector's picture to your preferences using the "Picture" menu. For operation of the menu screen,  see pages 32 to 35. Example: "Picture" screen menu for INPUT 1 (RGB) mode

Adjusting the Image
Select the item on the "Picture" menu and adjust the image. Description of Adjustment Items
Selectable items Contrast Bright Color Tint Sharp Red Blue Press \
for less contrast. Description of Adjustment Items
Selectable items Use \ and | to Clock adjust vertical noise. Phase adjust horizontal noise (similar to tracking on your VCR). H-Pos center the on-screen image by moving it to the left or right. V-Pos center the on-screen image by moving it up or down. 

Select "Special Modes" on the "Fine Sync" menu and the appropriate resolution. 
Note
· Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur,  making the image hard to see. ) · When a DVD player or Digital Video is connected,  select 480P as the input signal. · See "Signal Info (Checking the Input Signal)" on the next page for information on the currently selected input signal. 

Note
· You can automatically adjust the computer image by setting "Auto Sync" on the "Fine Sync" menu or pressing the AUTO SYNC button. · To reset all adjustment items,  select "Reset" and press . 

-38

Auto Sync
ment)

(Auto Sync Adjust-

Signal Info
Input Signal)

(Checking the

Used to automatically adjust a computer image. 

Select "Auto Sync" on the "Fine Sync" menu and set it to " "(ON) or " "(OFF). Description of Auto Sync Adjustment
Selectable Settings Description Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched,  when connected to a computer. Auto Sync adjustment is not automatically performed. 

Select "Signal Info" on the "Fine Sync" menu to check the current input signal information. 

Note
· The projector will display the number of scanned lines available from audio-visual equipment such as a DVD player or Digital Video. 

ON

OFF

Note
· Auto Sync adjustment is also performed by pressing on the projector or on the remote control. · The Auto Sync adjustment may take some time to complete,  depending on the image of the computer connected to the projector. · When the optimum image cannot be achieved with Auto Sync adjustment,  use manual adjustments.  [. . . ] 38 Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Power indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 PRJ mode (Reversing/Inverting Projected Images) . . . .  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP PG-A10S-SL

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP PG-A10S-SL will begin.