User manual SHARP PN-425

[. . . ] IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: · ThewirewhichiscolouredGREEN-AND-YELLOWmustbeconnectedtotheterminalintheplugwhichismarkedbythe letter E or by the safety earth or coloured green or green-and-yellow. Thelightningflashwitharrowheadsymbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may beofsufficientmagnitudetoconstituteariskof electric shock to persons. CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. [. . . ] Removing covers can expose you to high voltage and other dangerousconditions. When the product has been exposed to rain or water. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. When the product has been dropped or damaged. Wall mounting -- When mounting the product on a wall, be sure to install the product according to the method recommended by the manufacturer. Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperatureburns. - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor. - Do not display a still picture for a long period, as this could cause a residual image. - Never rub or tap the monitor with hard objects. - Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law. - This monitor and its accessories may be upgraded without advance notice. - Do not use the monitor where there is a lot of dust, where humidity is high, or where the monitor may come into contact withoilorsteam, asthiscouldleadtofire. - Ensure that the monitor does not come into contact with waterorotherfluids. Do not allow the monitor to receive strong shocks or to strongly vibrate. causing the monitor to fall or topple over may damage it. - Do not use the monitor near heating equipment or in places where there is likelihood of high temperature, as this may leadtogenerationofexcessiveheatandoutbreakoffire. - Images cannot be rotated on this monitor. [. . . ] This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Besuretoturnoffthemainpowerswitchanddisconnect the plug from the power outlet before connecting/ disconnecting cables. Mixing up the input and output terminals may cause malfunctions and the other problems. (Do not connect any cables to the remaining terminals. [. . . ]