User manual SHARP PN-L601

[. . . ] When there is no data which is being edited and is not saved The software is exited. When there is data which is being edited and is not saved A confirmation dialog box appears. When you touch "Exit with save", a dialog box appears to allow you to specify the destination to save the data. confirm the saving format , specify the destination , and save the data. [. . . ] You can switch through "Pen 1" to "Pen 3" and "Eraser" by repeatedly pressing Function Button 2 of the touch pen. To change functions using Function Button 2, select the touch panel driver "Properties", and set "Function Button 2" to "Pen Software Link" on the "OPERATION SETTING" tab. The eraser function can erase only the objects drawn with the pen function. You cannot use the "Eraser" button to erase pasted images. You cannot use it either to erase the edges of a line to make the line thinner. Even if you erase the edges only, the entire width of the line will be erased. An object drawn with the pen function cannot be erased if it is part of a group. When "Auto Pen/Eraser Mode Switching" is enabled (page 20), you can erase with the eraser or your finger when one of "Pen 1" to "Pen 3" or "Eraser" is selected. Touch the screen with the eraser or your finger, and after the cursor changes to the eraser, move the eraser or your finger. You can set the eraser size for erasing with the eraser or your finger to the touched area of the screen, or to the size selected on the palette. When "Erase touch panel contact When "Erase with size selected on area" is selected palette" is selected With Windows Vista/7, the display changes as follows when the "Eraser" button is selected in the transparent mode. The display returns to normal when the function other than the "Eraser" button is selected. - The computer screen in the background is hidden even by translucent objects. - An object is surrounded with a white line. The size of the eraser can be changed by selecting it from the palette for the "Eraser" button. To display the palette, touch the "Eraser" button again while it is in the selected state. The drawn lines and the images pasted on the board are handled in the software as an "object". You need to select an object before editing it. Select point When you select an object and then touch , the expansion menu appears to allow you the following edit operations: · Touch an area where something is drawn. You cannot select an object by touching the area where nothing is drawn. Selected object The area of the object is indicated with a dotted line, and symbols called select points appear on the vertices and sides of the area. By specifying an area by dragging, you can select several objects inside the area. [. . . ] If the checkmark is removed, must be clicked to close the palette. (3) Auto Pen/Eraser Mode Switching Use auto switching To use this function, select this to have the pen automatically switch to the eraser when the screen is touched with the eraser or your finger in pen mode. The area you touch (or cover) : When using an eraser or other object and the area of contact on the screen is at least 1-9/16 inch (4 cm) x 1-9/16 inch (4 cm), erase the area of contact. The selected size in Eraser Palette : Erase with the selected eraser size regardless of the amount of contact on the screen. [. . . ]