User manual SHARP PN-ZS1P

[. . . ] Main specifications Model Dimensions Weight PN-ZS1P See the figure below. 6. 5 kg (14. 3 lbs. ) (Weight includes two support rods and bolts) As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. [. . . ] Otherwise, the monitor may topple over, resulting in injury. · Only use the accessories with specified models. Do not modify the LCD Monitor or the accessories. Otherwise, the monitor may fall or topple over, resulting in injury. Caution: Not following these instructions could result in injury or property damage. · Tighten all the screws and bolts fully and securely. Insufficient tightening may cause the monitor to fall or topple over, resulting in injury. · When any deformation or cracks are found please stop using the LCD Monitor. Using the monitor without repairing the problem may cause the monitor to fall or topple over, resulting in injury. Printed in Japan EN(1) -4- -1- Supplied accessories Confirm that the following accessories have been provided with the product. Caution Installation procedure · The LCD Monitor is large and heavy. It must be moved with a hoisting device (chain block, etc. ). · Installation requires at least four people. Support rod x 2 M8 bolt x 4 M8 spring washer x 4 M8 plain washer x 4 Operation manual (this manual) 1 2 Make sure the LCD Monitor stand is secured with anchor bolts. [. . . ] · Check the hoisting condition frequently to prevent the LCD Monitor from falling. 5 6 Hoist to the height where the LCD Monitor is to be mounted. Mount the LCD Monitor to the stand (and support rods) using the bolts removed in step 3. Plain washer Spring washer 7 Confirm that the LCD Monitor is mounted securely, and then remove the hooks of the hoisting device. -2- -3- [. . . ]