User manual SHARP PW-TC900 QUICK REFERENCE

[. . . ] To adjust the volume, use 1 While in the TV viewing mode, press 2 Usearea. and an . The channel selection list appears. to select 2 Insert the supplied rechargeable battery (EA-BL14). Insert the rechargeable battery into the battery housing at an angle, and then slightly press the terminal end of the battery and completely press down the opposite side. · Do not touch the terminals of the rechargeable battery or the unit. · Do not insert the rechargeable battery reversely. [. . . ] · Do not insert the rechargeable battery reversely. This can cause problems such as breakage. Perform channel selection list settings on the dictionary screen. stylus and use it to accurately center 8 Pull out the"+" characters displayed on thetouch each on of the four touch pad the display (main display). Then do the same to the four "+" characters displayed on the handwriting pad. Stylus Pull out the stylus to use. Back of the unit 1 Fully extend the antenna. 3 Press The TV content is displayed. Select a channel by using the 3 by touching the channel name. numeric keys ( The selected TV program is displayed. to ), or Adjusting the display size The TV settings menu is displayed. 3 Connect the (EA-80A) AC adapter in the order of and then . 4 When the charge lamp will light red, the charging has started. Replace the battery cover. Charge lamp Power outlet (AC) selection 4 Select "channeland press list settings" (or touch the menu item to select it). The channel selection settings list appears. 1 While in the TV viewing . mode, press " and 2 Select " (or press touch the menu item to select it) Touching the screen in the TV viewing mode will also switch the display size. AC adapter connector 9 . 10 After these adjustments, press 11 Press or to turn the key sound on/off. The key sound (beep) on/off screen appears. The kana entry screen appears. · When calibration is finished the LCD contrast adjustment screen is displayed. Adjust the LCD contrast of the handwriting pad by touching or on the pad. 5 Select the settings and edit menu items from the on the right side of the screen to adjust the settings (For details, refer to the Instruction Manual). 3 Use and to select the display size and press (or touch the menu item to select it). The window configuration screen appears. Selecting a content in the menu display Press Viewing the color picture book You can search for information about the photos, maps and videos. Global search function You can search for a word in multiple contents/dictionaries. Enter a word into any of the " " " (Chinese), " within the target dictionary. The handwriting pad is set to the English character entry mode. 5 Likewise, enter " 2 Press to move the cursor to the Japanese entry area. The handwriting pad is now switched to enter kanji and kana. " in the entry area. · When you start drawing, the previous entry is confirmed and then erased. Appearance of the , , , , , or mark on the details screen indicates more information related to the entry is available, such as example sentences, explanations, notes, illustrations, diagrams, tables, and videos. By pressing in screens where this mark is displayed, the mark will display inverted. When there are multiple marks, move to the desired mark by using , , . By pressing , the contents are displayed. Contents , or can also be displayed by touching the mark itself. To exit, press twice. Press and 2 becomes invertedthe mark ). ( Each time you press , the audio plays. If several marks appear, press or to move the cursor to the desired mark and press . By highlighting an English word and pressing , you can look up the word in English-Japanese dictionary and play back the audio. Press and the color of reverts to non-inverted. Use or to first set the volume to low, then adjust it to the desired level. Listen to audio 3 Use the stylus to draw " " in the handwriting area. 6 Press The details screen appears. . The character shown in the candidate list display area is also placed in the entry area so that the dictionary search can proceed. · When the manual recognition is used or when you want to have the entry recognized soon after you . [. . . ] Use or to first set the volume to low, then adjust it to the desired level. Listen to audio 3 Use the stylus to draw " " in the handwriting area. 6 Press The details screen appears. . The character shown in the candidate list display area is also placed in the entry area so that the dictionary search can proceed. · When the manual recognition is used or when you want to have the entry recognized soon after you . finished writing, press Points on Writing Handwritten Characters Paying attention to the following points will ensure that handwritten characters are easily recognized. Ensure that characters have the correct number of strokes. [. . . ]