User manual SHARP QT-272H

[. . . ] In diesem Gert sind gefhrliche Spannungen vorhanden. Vor Ausfhrung von irgendwelchen Kundendienstarbeiten oder bei lngerer Nichtverwendung des Gertes stets den Netzstecker aus der Netzsteckdose ziehen. Lorsque le commutateur ON/STAND-BY est mise en , l'appareil est toujours sous tension. Lorsque le commutateur ON/STAND-BY se trouve sur la position ON, l'appareil est prt fonctionner par la tlcommande. [. . . ] Hold it down to advance continuously. ENGLISH 5 6 Within 5 seconds, press the lect the minute. Within 5 seconds, press the to adjust the minute. button to se- or button Preparation for Use Press the or button once to advance the time by 1 minute. Hold it down to advance continuously. 7 - Setting the clock - Within 5 seconds, press the ENTER button. To confirm the time display: Press the CLOCK button for less than 0. 5 seconds whilst the main unit turns the power on. The time display will appear for about 5 seconds. To readjust the clock: Perform "Setting the clock" from step 1. To change the 12-hour or 24-hour display: The clock can only be set using the buttons on the remote control. In this example, the clock is set for the 12-hour (AM 12:00) display. When the time is displayed, press the DISPLAY button for 0. 5 seconds or more to select the 12-hour or 24-hour display. 1 2 3 Press the ON/STAND-BY switch on the main unit to turn the power on. Press the CLOCK button. "AM 12:00" "0:00" The 12-hour display will appear. (AM 12:00 - PM 11:59) The 24-hour display will appear. (0:00 - 23:59) Within 5 seconds, press the lect the hour. button to se- Note: Insert memory batteries to keep the clock setting even after unplugging the unit. E-11 04/6/14 QT-272H_SEEG_E2. fm 9HX80432100007 General control Some of these functions are only available on the remote control. QT-272H " Setting surround effects 1 Press the SOUND MODE button repeatedly to select "SUR OFF". 2 Within 5 seconds, press the or button to select "SUR ON". ENGLISH D F To cancel the surround, select "SUR OFF". You can switch the display brightness by pressing the DIMMER button. Each time the button is pressed, the display brightness changes in the following order. Brightened OFF Dimmed FLAT CUSTOM ROCK POP JAZZ CLASSIC - General control - " To change the display brightness (3 levels) Preparation for Use " Changing the sound quality 1 Press the SOUND MODE button repeatedly to select "FLAT". During an operation, " " may appear indicating that the operation is disabled. P Play PLAY Pause PAUSE E E-14 04/6/14 QT-272H_SEEG_E3. fm 9HX80432100007 QT-272H Basic operation Some of these functions are only available on the remote control. ENGLISH " Fast forward/Fast reverse (search) You can search the desired point as you play the disc. 1 Whilst a disc is playing, press the Example: When the button is pressed or button. FF 2 X PLAY (Normal play) 2X 4X 6X 8X DVD Operation The disc is forwarded by the button and reversed by the button. 7 2 - Basic operation - Press the PLAY/PAUSE / button to return to normal playback. " To locate the beginning of a chapter/track (skip) You can skip the current chapter (track) to the next or previous. Notes: !On some discs, the search function is disabled. On a DVD, search does not operate between titles. On MP3 discs, the search is not possible across tracks. Sound output and the appearance of subtitles differ depending on the disc. When search is performed during the DVD playback, pictures may not be forwarded or reversed in the search speed specified in this manual, depending on the disc or the scene being played. Whilst a disc is playing, press the or button. SHARP 9HX80432100007 !You can also use the or button on the main unit. Press the button to skip to the next chapter (track). Press the button to skip to the beginning of the current chapter (track). Press the button again to skip to the beginning of the previous chapter (track). Notes: !Some discs do not display the chapter (track) and the skip feature is disabled. [. . . ] Did you remove the plug from the wall recalled. Are the memory batteries low? " Before transporting the unit 1 Set the ON/STAND-BY switch on the main unit to ON. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Press the OPEN/CLOSE button to close the disc tray. [. . . ]