User manual SHARP QT-CD48L/50H/150H

[. . . ] When the FUNCTION switch is set at STANDBY position, mains voltage is still present inside the unit. The letters in brackets contained in the model number indicate the colour of the product only. Operation and specifications are unaffected. Warning: This unit contains no user serviceable parts. Never remove covers unless qualified to do so. [. . . ] This may occur even though radio broadcasts are audible. Notes: I Replace all old batteries with new ones at the same time. I Remove the batteries if the are weak or if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. Caution: Do not use rechargeable batteries (nickelcadmium battery, etc. ) E-3 Listening to a CD TAPE (STAND-BY) STOP CD RADIO MIC PAUSE STOP/EJECT F. FWD REWIND PLAY RECORD RANDOM PLAY/ PAUSE PLAY/ PAUSE STOP POWER FM ST DOWN/ F. REVERSE UP/ F. FORWARD PROGRAM REPEAT DOWN/ F. REVERSE UP/ F. FORWARD Precautions : I When "no" or track number is displayed, the power is connected. If you will not be using the CD player, set the FUNCTION switch to STAND-BY. I Do not open the CD compartment whilst the disc is rotating. I If the disc is damaged, dirty, or loaded upside down, the total number of tracks will not appear. Clean, replace, or reload the disc properly. I Keep foreign objects out of the CD compartment. I Subjecting the unit to shock or vibration may cause mistracking. In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. ) Open CD compartment will cancel the random function. To start playing a desired track, press the DOWN/F. REVERSE 4 or UP/F. FORWARD ¢ button whilst in the stop mode to select the track number, and then press the PLAY/PAUSE 3 8 button. To fast forward audibly: During playback, hold down the UP/F. FORWARD ¢ button. To fast reverse audibly: During playback, hold down the DOWN/ F. REVERSE 4 button. E-5 H Repeat Play H Programmed play Set the function switch to CD You can repeat one track, all the tracks on the disc currently played or the programmed tracks. You can choose up to 20 selections for playback in the order you like. 1 Whilst the disc is playing, press the REPEAT button. Each time the button is pressed, the repeat play mode changes in the following order. 1 2 Set the FUNCTION switch to CD. Whilst in the stop mode, press the PROGRAM button to enter the programming save mode. (First desired track will displayed on) 1 ALL PROG REPEAT ONE REPEAT ALL REPEAT DISAPPEAR (NORMAL PLAY) 3 2 To return to the normal playback, turn off "REPEAT ONE" and "REPEAT ALL" by pressing the REPEAT button several times. Press UP/F. FORWARD ¢ or DOWN/F. REVERSE 4 button to select the desired track. Press the PROGRAM button to save the selected track number. PROG To repeat a desired track: Perform steps 1 - 6 in the "Programmed play" section on page 6 and then press the REPEAT button with the "REPEAT 1" and "REPEAT ALL" indicator appear. To repeat random play: Whilst random is playing, I For full disc repeat play, press the repeat button once and the "REPEAT ALL" indicator will appear. To cancel repeat random play:, I Press the STOP 7 button. 4 PROG Selected Track Number 5 To programme the next desired tracks, repeat steps 3 - 4 up to 20 tracks can be programmed. Press the PLAY / PAUSE 3 8 button to start playback. 6 E-6 * Adding track to the programme If programme has been previously stopped, press PROGRAM button repeatedly till last desired track of original track of original programme. "Prog 00" will be displayed, then repeat steps 3 - 4 for other desired track. [. . . ] Cassettes have removable tabs that prevent accidental recording or erasing. Removing the tab will protect the corresponding side from being erased. Cover the tab holes with adhesive tape to erase or record again. Side A (1) I I I To interrupt playback: Press the PAUSE 8 button during playback. Press the PAUSE 8 button again to resume playback. [. . . ]