User manual SHARP SC-3700CDH

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. [. . . ] If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts. Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. After auto channel scan type is set and selected and confirmed, installation process will start and progress bar will move along. After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN, please select "Yes" and than press "OK". HINT: This feature can be used for direct broadcast entry. ⷠSelect Manual Channel Scan from the Installation menu by using " "/" " and OK buttons. Use " "/" " button to highlight an item and then press " " or " " button to set an option. Press OK button to quit channel list and watch TV. You can select options by using " "/" " and OK buttons. In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. ⷠSelect the channel that you want to lock and select Lock option. You will be asked to enter parental control PIN. Note: If the Country option is set to France, you can use 4725 as the default code. Use CH /CH buttons to move page up or down. Lock symbol will be displayed next to the selected channel. Enter the desired channel number by using the numeric buttons on the remote control. If there is a previously stored channel on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK. You can create a list of favourite programmes. You can set various channels as favourites so that only the favourite channels are navigated. You can select a broadcast type option from the list by using " " /" " and OK buttons. [. . . ] When connecting devices to your TV's connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. Note: It is not guaranteed that all DivX® formats are supported. Your TV is capable of finding and updating new software upgrades over broadcast channels. ⷠFor broadcast channels search, TV looks the available channels stored in your settings. [. . . ]