User manual SHARP SD-PX15H

[. . . ] In diesem Gert sind gefhrliche Spannungen vorhanden. Vor Ausfhrung von irgendwelchen Kundendienstarbeiten oder bei lngerer Nichtverwendung des Gertes stets den Netzstecker aus der Netzsteckdose ziehen. Lorsque la touche ON/STAND-BY est mise en STAND-BY, l'appareil est toujours sous tension. Lorsque la touche ON/STAND-BY se trouve sur la position STAND-BY, l'appareil est prt fonctionner par la tlcommande. [. . . ] Depending on the disc, playback may resume from slightly before the stopped position. For SVCD/MP3 discs, resume play is not available. E-25 04/2/9 SD-PX15H_SEEG_E. fm TINSZA052AWZZ SD-PX15H " To zoom images (zoom) You can magnify images during playback. ENGLISH D 1 ZOOM indicator Pressing the button cycles through the zoom settings as follows: ZOOM: 1 ( 1. 2) ZOOM: 2 ( 1. 5) ZOOM: 3 ( 2. 0) Off (The indicator goes out. ). In the pause mode or during playback, set the MODE 1/MODE 2 switch to MODE 2 and press the ZOOM button. ZOOM : 1 F 2 S To shift the view and display the desired part of a zoomed image, press the , , or button repeatedly. DVD Operation " To change the angle You can change the angle of view when playing a DVD disc that contains scenes recorded from multiple angles. - Useful operation - V I 1 When "ANGLE" appears on the unit display during playback, set the MODE 1/MODE 2 switch to MODE 2 and press the ANGLE button. Use the ANGLE button to select an angle number. Each time you press, the angle changes. 1 To return to normal view: Press the ZOOM button repeatedly to select "Off" (the indicator goes out). When you cancel the zoom function, you cannot shift the view. N 2 2 Notes: !An image may become distorted when zoomed. When the zoom indicator changes from white to red whilst shifting the image, you cannot shift it any further. P Notes: !The angle number is not displayed if there is no other angle recorded. Refer to the manual of the disc as the operation may vary depending on the disc. E E-26 04/2/9 SD-PX15H_SEEG_E. fm TINSZA052AWZZ SD-PX15H Useful operation (continued) " To select a subtitle or audio language from the disc menu You can select the desired subtitle/audio language and sound system (5. 1 ch Dolby Digital or DTS sound) on your DVD if it has a disc menu. ENGLISH 1 In the stop mode or during playback, set the MODE 1/MODE 2 switch to MODE 1 and press the MENU button. Example 1. Highlights 2. Start Movie 2 Press the , , or button to select a subtitle/audio language and press the ENTER button. You can also use the direct number buttons for some discs. DVD Operation Notes: - Useful operation - !The procedure shown here provides only general steps. The actual procedure for using the disc menu depends on the disc you are using. During programmed play, setting is not possible on the disc menu. " To select a title from the top menu of the disc On a DVD with multiple titles, you can select a title from the top menu. " To change the subtitle language You can change the subtitle language or hide subtitles during playback. 1 2 1 In the stop mode or during playback, set the MODE 1/MODE 2 switch to MODE 2 and press the TOP MENU button. When you set the unit to the stand-by mode or replace the disc, settings return to the default. For MP3 discs, you cannot change the audio output. " Sharpening the image (Super picture) 1 During playback, set the MODE 1/ MODE 2 switch to MODE 2 and press the S. PICTURE button to select "ON". Within 10 seconds, press the button to set the level. or S S I ON "ON" and "OFF" will be switched with each press of this button. 2 N ON Level OFF ON ON Setting Normal Slightly clearer Clearer ON ON Level Setting A lot clearer Soft P To restore the original image quality: In step 1, select "OFF". E E-28 04/2/9 SD-PX15H_SEEG_E. fm TINSZA052AWZZ SD-PX15H Various settings (continued) " To change the display on the unit During playback, set the MODE 1/MODE 2 switch to MODE 1 and press the DISPLAY button. Each time you press, the display changes. ENGLISH DVD-Video: Title elapsed time Title/Chapter number Chapter elapsed time DVD-Audio: DVD Operation Track elapsed time Group/Track number Group elapsed time - Various settings - " To change the display on TV screen During playback, set the MODE 1/MODE 2 switch to MODE 2 and press the ON SCREEN button. Each time you press, the display changes. Example: DVD Always displayed Not displayed After approx. 2 seconds Sampling frequency Sampling frequency Sampling frequency (low frequency effects)(*) (surround)(*) (2 channel)(*) (*) Sampling frequency display may differ or may not appear depending on the disc. Notes: Displayed for approx. 3 seconds 2/5 8 / 30 01 : 23 : 40 C DVD !Title/Chapter numbers or elapsed time may not appear depending on the disc. The playing time of the disc specified on the jacket, etc, may not include silence between tracks, and may differ from that displayed on the unit. Elapsed time on the display does not indicate the actual time. 2/5 8 / 30 01 : 23 : 40 C DVD E-29 04/2/9 SD-PX15H_SEEG_E. fm TINSZA052AWZZ SD-PX15H ENGLISH " Switching elapsed time During playback, set the MODE 1/MODE 2 switch to MODE 1 and press the DISPLAY button. Each time you press, the display changes. " To change the setting on the playback control screen On the playback control screen, various settings can be changed at the same time. D SACD: Track elapsed time Track number Total elapsed time 1 2 During playback, set the MODE 1/MODE 2 switch to MODE 2 and press the DVD SET UP button. or button to select the item, and press the ENTER F Example: DVD 1 Title number 2 Chapter number 1 2 3 4 5 6 7 G S VCD/CD: Track elapsed time Total elapsed time 3 Elapsed playing time 4 Subtitle 5 6 7 8 Angle Audio language Gamma Super picture ENTER ENTER RETURN 8 9 " Switching playing time In the stop mode (SACD/VCD/CD), select a track number with the or button. [. . . ] When a button is pressed, the unit does not respond. Interference or noise occurs on the TV image. "CLOCK ADJUST" appears when checking the clock. No images are displayed. - Troubleshooting chart - P. [. . . ]