User manual SHARP SJ-2256/2266

[. . . ] It differs from the space in the measurement condition of the amount of power consumption. â· It is possible to use the refrigerator with a less amount of power consumption by keeping greater space. â· If using the refrigerator in the space below dimension of the figure, it may cause the temperatures in the unit to rise, loud noise, and failure. Do not touch the compressor unit or its peripheral parts, as they become extremely hot during operation and the metal edges may cause injury. [. . . ] â· Do not place next to heat generating appliance. Using the casters, it is possible to move back and forth. â· Carry the refrigerator by holding the handles located on the rear and bottom. Before using your refrigerator Clean the inside parts with a cloth soaked in warm water. If soapy water is used, wipe it off thoroughly with water. NOTE (Only for SJ-2266) Do not replace the right and left position of the utility pocket and the utility pocket (large). Hints when making ice Do not over fill the Ice cube trays; otherwise the ice cubes will be joined together when frozen. Ice cubes are made, 2 When theclockwise to empty theturn the lever ice into the Ice cube box. Ice cube box In this way, food is refrigerated gently, without exposing it to cold air flow. To prevent damage to the Ice cube box, do not make ice in the Ice cube box or pour oil into it. Stick-type food products can also be stored inside. Pizza box) can be stored by lifting the partition from the bottom of the pocket. To maximize the shelf life of perishable food products, ensure that the food is the freshest possible quality. The following is a general guide to help promote longer food storage. Evenly place the food on the shelves to allow the cooling air to circulate efficiently. â· Hot foods should be cooled before storing. Storing hot foods increases the temperature in the unit and increases the risk of food spoilage. â· Do not block the outlet and inlet of the cool air circulating circuit with foods or containers; otherwise the foods will not be evenly cooled throughout the refrigerator. Freeze small quantities of food at a time to freeze them quickly. â· Food should be properly stored or covered and the air should be removed to seal tightly. To prevent damage to your refrigerator, do not use heavy This may lead to rusting and deterioration of the electrical insulation. To prevent cracking on inside surfaces and plastic components, follow these tips. [. . . ] â· Loud noise produced once a day by the compressor --- Operating sound produced immediately after automatic defrost operation. â· Sound of flowing fluid (gurgling sound, fizzing sound) --- Sound of refrigerant flowing in pipes (sound may become louder from time to time). â· Cracking or crunching sound, squeaking sound --- Sound produced by expansion and contraction of inner walls and internal parts during cooling. This may occur in one of the following cases. [. . . ]