User manual SHARP SJ-D280V

[. . . ] If the model contains R600a-see name plate under refrigerant (the coolant isobutane), naturals gas that, is very environmentally friendly but also combustible. When transporting and installing the unit care must be taken to ensure that none of the refrigeration circuit components become damaged. In the event of damage avoid naked flames or ignition sources and ventilate the room in which the unit is placed for a few minutes. Warning: Keep ventilation openings in appliance enclosure or in structure for building in, clear of obstruction. [. . . ] The appliance must be stand firmly and level on the floor Use the two front levelling-feet to compensate for an even floor. The outside of the appliance and the accessories inside should be cleaned with a solution of water and liquid soap; the inside of the appliance with sodium bicarbonate dissolved in lukewarm water. Wait after 3 hours before plugging the appliance in to the main power to ensure proper performance. There can be an odour when you first switch on the appliance. It will disappear after the appliance starts to cool. By rotating the knob from position 1 to 5, colder temperatures can be obtained. Freezer & Refrigerator Thermostat Setting; 1 ­ 2 : For short-term storage of food in the freezer compartment, you can set the knob between minimum and medium position. 3 ­ 4 : For long-term storage of food in the freezer compartment, you can set knob medium position. So after you get the cold condition you must position to previous position. Your fridge is designed to operate in the ambient temperature intervals stated in the standards, according to the climate class stated in the information label. We do not recommend operating your fridge out of stated temperatures value limits in terms of cooling effectiveness. A) Super freezing: If ambient temparature is more than 18°C, This switch can be used as superfreeze switch. Super freeze switch should be used for freezing the fresh food or when the RED lamp on the head panel is ON. (RED lamp on the head panel becomes ON when there is insufficient cooling). The appliance will work longer when you activate this switch. So after you get the cold condition (or the Red lamp on the head panel is off) you must return to previous position. At the ambient temperature more than 18°C, if superfreezing function doesn't want to be used, it must always be set to OFF position. B) Low ambient performance: If ambient temparature is less than 18°C, this switch can also be used as a low ambient switch for good low ambient performence. In low ambient temperatures, this switch heats the fridge part to prevent extra cooling / freezing. GREEN LAMP: When the appliance is connected to the power supply, the green lamp on the display panel will turn on automatically. RED LAMP: When the freezer compartment is not cold enough, the red lamp will turn on. set the super switch "1" position until the red lamp is off. [. . . ] The refrigerator and freezer compartment should be cleaned periodically using a solution of bicarbonate of soda and lukewarm water Clean the accessories separately with soap and water. Do not clean them in the washing machine. After washing, rinse with clean water and dry carefully. When the cleaning operations have been completed reconnect the plug of the unit with dry hands. [. . . ]