User manual SHARP SJ-W36/40J

[. . . ] Keep this operation manual with the refrigerator if you move or if the cabinet changes owners so that whoever uses it can read about the various features and safety rules. Contents Page Features Features Plasmacluster ion generator OUT Inactivates airborne "mold and fungus" in the kitchen. Warning Caution Installation Before using your refrigerator Adjusting the clock Items that are often mistaken as malfunctions Plasmacluster ion generator IN In the interior, this generates ions to remove the foul-smells and suppress breeding bacteria. Low-temperature catalyst Refrigerator compartment Freezer compartment Vegetable compartment Ice compartment Making ice cubes This removes foul-smells drifting within a refrigerator. The deodorizing unit which requires no manual operation because it automatically starts operating when the refrigerator is powered on. Plasmacluster and low-temperature catalytic deodorizer will not operate since chilled air does not enter/exit the vegetable compartment. Mounting and removing accompanying parts Cleaning the refrigerator Cleaning the automatic ice maker Cooling panel (refrigerator compartment) Keeps compartment temperature uniform. The "indirect" cooling method of the cooling panel gently cools foods in a "wrapping" manner rather than cooling directly. [. . . ] Replacement is also required when there is fungus, rip or odor on the purifier filter. Contact the Sharp Service Center when ordering a purifier filter. Ice making capability will not change even when the purifier filter is not used. 2 Wash the purifier filter with water. Do not use detergent or bleach. (Use a soft sponge when using. ) This may lead, the detergent may accumulate within the filter or the active charcoal may become ineffective. Notes Do not bend or poke with stick, etc. Do not wash by rubbing. Ice tray and pipe Cleaning is normally not required. If the refrigerator has not been used for a long time, perform "Cleaning the ice tray". (58 page) 40 Power outage During a power outage Refrain from adding foods and opening/closing doors. After power turns back on The LCD panel will be restored to its factory settings. Set the clock (page 28) and set the temperature settings, etc. (page 50) Moving / Transporting Empty the ice tray and remove the power plug. (page 59) When moving front / back Raise the adjustable feet and use the transportation wheels. Adjustable foot (right and left) Switching off your refrigerator 1 2 3 Empty the ice tray. Clean the inside of the compartments and allow to dry by leaving the doors open for 2 ~ 3 days. Wipe condensation Wrap succulent foods with plastic wrap. with a dry cloth Are the doors being frequently opened?and fogging with Are bags of food products caught in the door?Contact the Sharp Service Center for replacement door packing. This is due to the high humidity maintained within the vegetable compartment. Straighten the refrigerator using the right and left adjustable feet. In the case of the right illustration, raise the left adjustable foot. Lower the Lower the right and left adjustable feet adjustable feet and tilt the refrigerator to the back side. Doors may open as the result of wind pressure. The buzzer will not sound if a door is opened only slightly. This feature is not available for the vegetable compartment. [. . . ] The display will return to the time screen. 8 . Lastly, dispose of the ice cubes in the ice cube case. 58 ( ) ( ) Use this feature when emptying the ice tray (When not using the refrigerator for some time or when moving the refrigerator) 1 . Empty the water tank and set into the unit. 5 "CHOOSE/START". 40 The temperature display bar will move and operation will start. [. . . ]