User manual SHARP SJ-420N

[. . . ] Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benefit from it. All persons using the cabinet must be thoroughly familiar with its operation and safety features. Keep this operation manual with the refrigerator if you move or if the cabinet changes owners so that whoever uses it can read about the various features and safety rules. [. . . ] â· If using the refrigerator in the space below size of the figure, it becomes cause of failure. Using the front Adjustable foot, ensure that the refrigerator is positioned firmly and level on the floor. Before using your refrigerator Clean the inside parts with a cloth soaked in warm water. If soapy water is used, wipe it off thoroughly with water. Keep your refrigerator out of direct sunlight. â· Do not place next to heat generating appliance. Controlling temperatures Hints when making ice 1. Do not over fill the Ice cube trays; otherwise the ice cubes will be joined together when frozen. When the ice cubes are made, turn the lever clockwise to empty the ice into the Ice cube box. If the freezer does not cool even when setting FREEZER TEMP. CONTROL set to MAX, there will be less cold air directed to the refrigerator compartment, and the refrigerator compartment may not become cold enough. NOTE: To prevent damage to the Ice cube box, do not make ice in the Ice cube box or pour oil into it. Ice cube box The freezer compartment may not cool sufficiently when leaving REFRIGERATOR TEMP. This refrigerator is provided with a THERMOMETER in the refrigerator compartment to allow you to control the average temperature in the coldest zone. (The door pocket positioned at the same height isn't the coldest zone. You can carry out regular checks to ensure the temperature in the coldest zone is correct and, if necessary, adjust the refrigerator temp. control as indicated in the chapter "Controlling Temperature". To maintain a correct temperature inside the appliance, check that the thermometer is always BLUE. If the thermometer turns WHITE, the temperature is too high; in this case, increase the refrigerator temp. Control setting and wait for 6 hours before checking the thermometer again. This is because MAX setting (FREEZER TEMP. CONTROL) may result in too little air flow to the refrigerator compartment, causing too warm temperature in the refrigerator compartment. [. . . ] â· Do not place food directly in front of cold air outlet. Before you call for service, check the following points. Problem The outside of a cabinet is hot when touched. Loud noise produced by the compressor when operation starts --- Sound becomes quieter after a while. [. . . ]