User manual SHARP UX-41/61 FO-51/71

[. . . ] Welcome, and thank you for choosing a Sharp facsimile!The features and specifications of your new Sharp fax are shown below. Rapid Key Dialling: 5 numbers Speed Dialling: 35 numbers Initial starter roll (included with machine): 10 m Replacement roll (not included): FO-20PR 30 m (12. 7 mm core) UX-41/FO-51: Tear off by hand UX-61/FO-71: Automatic cutter 448 KB (approx. [. . . ] Enter the desired number of rings (any number from 2 to 5). When the reception mode is set to TEL, you must answer all calls by picking up the fax machine's handset or an extension phone connected to the same line. When the fax machine rings, pick up the handset. If you hear a fax tone, wait until the display shows RECEIVING and then replace the handset. If the other party first speaks with you and then wants to send a fax, press Answer the extension phone when it rings. If you hear a soft fax tone, wait until your fax responds (the extension phone will go dead), then hang up. Phone goes dead If the fax doesn't respond, or if the other party first talks to you and then wants to send a fax, press 5 once and twice on the extension phone (only on a tone dial phone). The above step is necessary if you have set the Fax Signal Receive setting Your fax will not accept the signal to begin reception (5**) if a document is Your fax will automatically begin reception if you hear a soft fax tone after answering a call on your fax or an extension phone. If you use a computer fax modem to send documents on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents from the computer fax modem. Follow the steps below to change the setting. If desired, you can use a number other than 5 to activate fax reception from an extension telephone. Enter the desired number (any number from 0 to 9). In situations where printing is not possible, such as when your fax runs out of paper or the paper jams, incoming faxes will be received to memory. When you have received a document in memory, FAX RX IN MEMORY will appear in the display, alternating with OUT OF PAPER or PAPER JAMMED. When you add paper or clear the jam, the stored documents will automatically print out. When documents are stored in memory, do not turn the power off. Your fax machine can also be used to make copies. When you are ready to begin copying, press Your fax machine can be used like a regular telephone to make and receive voice calls. To make or receive a voice call, the power must be on. Dial the number using one of the following methods: Telephone number with the numeric keys. Speak with the other party when they answer. After lifting the handset, you can dial any combination of Normal Dialling, Rapid Key Dialling and Speed Dialling numbers. [. . . ] This appears if you forgot to replace the handset after using it to dial and send a fax. Replace the handset or press the STOP key to clear the message. The SPEAKER key has been pressed and the fax machine is waiting for you to dial. Load a new roll of thermal paper as explained in Loading the Thermal Paper in Chapter 1. [. . . ]