User manual SHARP VC-MH705LM

[. . . ] VC-MH715HM Shown VC-MH715HM VC-MH705HM VC-MH705LM VIDEO CASSETTE RECORDER OPERATION MANUAL ® G AUTO TUNING G SHARP SUPER PICTURE G NICAM Hi-Fi STEREO G 6 HEAD EXTENDED PLAY G CHILD LOCK G NTSC SIMPLE PLAYBACK Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright G Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] If the video tape is ejected when the VCR tries to record the record protection tab has been removed. · During recording, press STOP to cancel the recording. If there are further recordings to be made, the VCR will return to Timer Standby. www. sharp. co. uk/support 16 BASIC OPERATION HOW TO CHECK, CHANGE AND CANCEL A DELAYED RECORDING Before you start! · If the Timer Standby symbol press the TIMER ON/OFF symbol. appears on the VCR display, button to remove the CHECKING A RECORDING 1. Press the SET · SET MENU SCREEN T I ME R MOD E SE T UP button to confirm. All the delayed recordings in the VCR's memory will be shown. button to exit. : SE L ECT : ENT ER 4. If the settings are correct press the MENU SET ME NU : E X I T · If you wish to change or cancel any settings, follow the procedures below. CHANGING A RECORDING 1. Follow steps 1 to 3 of CHECKING A RECORDING above. 2. To change a delayed recording, press [ / ] to highlight the recording, then press SET the SET button to select. 3. Press[ / ]to highlight the setting to be / ] 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP ---- changed and correct it by using the[ or the NUMBER BUTTONS. SET 4. When all corrections are complete press the SET button to confirm, then press the MENU button to exit. Follow steps 1 to 3 of CHECKING A RECORDING above. 2. To cancel a delayed recording, press [ / ]to highlight the recording to be cancelled, then press CLEAR. 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP --/-- --:--:-- ---/-- --:--:-- ---/-- --:--:-- -- 3. Press the MENU NOTE: · button to exit. If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to Timer Standby mode. www. sharp. co. uk/support 17 ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you button as follows: can use the AUDIO OUT · button once. The LEFT audio channel will be sent to BOTH Press the AUDIO OUT speakers. The RIGHT audio channel will be sent to BOTH Press the AUDIO OUT speakers. button a third time and the MONO track will be sent to BOTH Press the AUDIO OUT speakers. L and R will not appear on the VCR display. Pressing the AUDIO OUT button a fourth time, normal Hi-Fi stereo sound will be heard. [. . . ] (hereafter called Sharp) guarantee to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below: 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by SHARP. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in the course of a business, trade or profession. [. . . ]