User manual SHARP VCH81HM OPERATION MANUAL

[. . . ] Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable plug is fitted and fit an appropriate type observing the wiring code below. DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur. [. . . ] About the scan head The scan head lamp remains on constantly when the unit is in the ready condition (when the start ( ) indicator is illuminated). The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not indicate unit trouble. Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format. Adobe® Reader® can be downloaded from the following URL: http://www. A paper form operation manul can be obtained from your authorized SHARP dealder or upon request by contacting SHARP. 78 Please inform the model name, the serial number of the machine and the language needed. Do not forget to add your name and your address. Local voltage ±10% (For this machine's power supply requirement, see the name plate located on the back of the machine. 2 B Sound pressure level LpA (reference) (Bystander positions) Copying mode: 49 dB (A) Standby mode: 19 dB (A) Sound pressure level LpA (reference) (Operator position) Copying mode: 52 dB (A) Standby mode: 19 dB (A) Noise emission measurement in accordance with ISO7779. Unit power must be turned off before installing any supplies. caution: · Place the unit on a firm, level surface. Do not install the unit in a humid or dusty location. When the unit is not used for a long time, for example during prolonged holidays, turn the power switch off and remove the power cord from the outlet. When moving the unit, be sure to turn the power switch off and remove the power cord from the outlet. Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15 seconds before turning it back on. Do not cover the unit with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the unit. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The socket-outlet shall be installed near the unit and shall be easily accessible. [. . . ] Do not drop the unit, subject it to shock or strike it against any object. Store spare supplies such as drum cartridges and TD cartridges in a dark place without removing from the package before use. If they are exposed to direct sunlight, smudges on copies may result. CAUTION: Do not install the machine in a location with poor air circulation. [. . . ]