User manual SHARP VCMH704 OPERATION MANUAL

[. . . ] TINS-3992UMZZ HM Final Cover 12/9/01 10:07 am Page 1 VC-MH704HM Shown VC-MH714HM VC-MH704HM VC-MH704LM VIDEO CASSETTE RECORDER OPERATION MANUAL G AUTO INSTALLATION G SHARP SUPER PICTURE G NICAM Hi-Fi STEREO G 6 HEAD EXTENDED PLAY G CHILD LOCK TINS-3992UMZZ HM Final Cover 12/9/01 10:07 am Page 2 Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright G Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Follow steps 1 to 3 of CHECKING A RECORDING above. 2. To change a delayed recording, press [ / ] to highlight the recording, then press SET the SET button to select. 1/2 3. Press[ / ]to highlight the setting to be / ] changed and correct it by using the[ or the NUMBER BUTTONS. DA T E 21 / 06 --/---/---/-- P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-- SP ---- 4. When all corrections are complete press the SET button to confirm, then press the MENU button to exit. Follow steps 1 to 3 of CHECKING A RECORDING above. SET 2. To cancel a delayed recording, press [ / ]to highlight the recording to be button to exit. Press the MENU NOTE: · 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP --/-- --:--:-- ---/-- --:--:-- ---/-- --:--:-- -- If there are some programmes to be recorded, do not forget to press TIMER ON/OFF button to return the VCR to Timer Standby mode. www. sharp. co. uk/support 17 TINS-3992UMZZ English. book Page 18 Monday, June 4, 2001 9:21 AM ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows: · button once. The LEFT audio channel will be sent to BOTH Press the AUDIO OUT speakers. The RIGHT audio channel will be sent to BOTH speakers. Press the AUDIO OUT button a third time and the MONO track will be sent to BOTH speakers. L and R will not appear on the VCR display. Pressing the AUDIO OUT button a fourth time, normal Hi-Fi stereo sound will be heard. L and R will appear on the VCR display. · · · NICAM Hi-Fi STEREO SOUND Your VCR can receive and record NICAM sound. The VCR is normally set so that NICAM sound is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to receive the mono signal. If you wish to do this follow the procedure below: 1. Press the [ button to display the main menu on the screen. / ] menu select buttons to SET select MODE then press theSET button to confirm. The MODE menu will be displayed with NICAM selected. N I CAM CO L OUR AU T O AU T O OF F PAL · 3. Press [ / ]to select OFF. SET 4. Press the MENU NOTES: · · · · button to confirm and return to the main menu screen. [. . . ] (hereafter called Sharp) guarantee to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below: 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by SHARP. As this product is intended for private domestic use only, the guarantee will not apply if the product is used in the course of a business, trade or profession. [. . . ]