User manual SHARP VCMH712HM OPERATION MANUAL

[. . . ] 712LM cover 14/5/99 12:05 pm Page 1 VC-MH712HM VC-MH711HM VC-MH712LM VIDEO CASSETTE RECORDER OPERATION MANUAL q NICAM/Hi-Fi STEREO q SHARP SUPER PICTURE q CHILD LOCK q AUTO TUNING 712LM cover 14/5/99 12:05 pm Page 2 Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Then press SET to confirm. If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-15 712. book Page 16 Friday, May 14, 1999 12:08 PM BASIC OPERATION HOW TO SET A DELAYED RECORDING 8. Enter the start time using the [ / ] or the 1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7D0 3 2 1 : 0 5 -:---/-- --:--:---/-- --:--:-SP SP --- NUMBER BUTTONS hours first then minutes (when entering less than 10 minutes add a '0' before the number), for example for 21:05 start, press 2 1 0 5. Enter the stop time, for example for 22:30 stop, press 2 2 3 0. 10. If your VCR has long play facility and you wish to change the RECORDING SPEED, use the [ / ] to highlight SP. Press [ / ] to select standard play (SP) or long play (LP) as required. 1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7D0 3 2 1 : 0 5 -:---/-- --:--:---/-- --:--:-SP LP --- 11. Press SET to confirm. · The MENU now shows all the timer settings you have entered. If you wish to make additional timer recordings, repeat this procedure. settings, press MENU to remove the menu from the TV screen. 12. When you have completed entering timer 13. Press TIMER ON/OFF once to place the VCR in TIMER STAND-BY mode. will be shown on DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7 D 0 3 2 1 : 0 5 22 : 3 0 --/-- --:--:---/-- --:--:-1/2 SP LP --- NOTES: · · · If flashes a video tape has not been inserted into the VCR. If the video tape is ejected when the VCR tries to record the record protection tab has been removed. During recording, press STOP ( ) to cancel the recording. If there are further recordings to be made, the VCR will return to TIMER STANDBY. If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-16 712. book Page 17 Friday, May 14, 1999 12:08 PM BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING MENU SCREEN T I ME R MOD E SE T UP 1. If in TIMER STANDBY mode, press TIMER ON/OFF to exit. 2. Press SET to confirm · · All the delayed recordings in the VCRs memory will be shown. You can check the settings and change or cancel them. SET : SE L ECT : ENT ER ME NU : E X I T CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP ---- 2. If you wish to change a delayed recording, press [ / ] to highlight the recording, then press SET. 3. Press [ / ] to highlight the setting to be changed and correct it by using the[ / or the NUMBER BUTTONS. ] 4. When all corrections are complete press SET, then press MENU. CANCELLING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING. 2. [. . . ] You wish to re-arrange the channel order. You wish to change the time on the clock. If problems persist contact the SHARP Customer Helpline on tel: 0990-274277 GB-34 712. book Page 35 Friday, May 14, 1999 12:08 PM GUARANTEE SHARP Electronics (UK) Ltd (hereafter called Sharp) guarantee to provide for the repair, or at its option the replacement, of this product subject to the conditions listed below: 1. This guarantee shall only apply to faults which are due to inferior workmanship or materials. It does not cover faults or damage by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by a Service Facility appointed by SHARP. 2. [. . . ]