User manual SHARP VCMH713 OPERATION MANUAL

[. . . ] VC-MH713HM VIDEO CASSETTE RECORDER OPERATION MANUAL G NICAM Hi-Fi STEREO G 6 HEAD LONG PLAY G CHILD LOCK G SHARP SUPER PICTURE Dear SHARP Customer Thank you for buying this SHARP VCR. Given proper care it will provide years of entertainment for the whole family. Please read this operation manual carefully before attempting to operate the VCR. Copyright G Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] If there are further recordings to be made, the VCR will return to TIMER STANDBY. If problems persist contact the SHARP Helpline on tel: 0990-274277 16 BASIC OPERATION HOW TO CHECK, CHANGE AND CANCEL A DELAYED RECORDING Before you start! · If appears on the VCR display, press the TIMER ON/OFF the symbol. STOP TIMER ON/OFF button to remove CHECKING A RECORDING 1. Press [ SET MENU SCREEN T I ME R MOD E SE T UP to switch on the VCR. Press the MENU / button to confirm. ]to select TIMER. Press the SET · All the delayed recordings in the VCR's memory will be shown. SET 4. If the settings are correct press the MENU button to exit. · If you wish to change or cancel any settings, follow the procedures below. : SE L ECT : ENT ER ME NU : E X I T CHANGING A RECORDING 1. Follow steps 1 to 3 of CHECKING A RECORDING. 1/2 DA T E 21 / 06 --/---/---/-P R S T AR T S T OP 02 12 : 00 13 : 00 --:--:---:--:---:--:-SP ---- 2. To change a delayed recording, press [ / ] to highlight the recording, then press SET the SET button to select. 3. Press [ / ] to highlight the setting to be / ] changed and correct it by using the [ or the NUMBER BUTTONS. 4. When all corrections are complete press the SET button to confirm, then press the MENU button to exit. Follow steps 1 to 3 of CHECKING A RECORDING. 1/2 DA T E P R S T AR T S T OP 2 1 / 0 6 0 2 1 2 : 0 0 1 3 : 0 0 SP --/-- --:--:-- ---/-- --:--:-- ---/-- --:--:-- -SET 2. To cancel a delayed recording, press [ / ] to highlight the recording to be cancelled, then press CLEAR. 3. Press the MENU NOTE: · button to exit. If there are some programmes to be recorded, do not forget to press TIMER ON/OFF TIMER ON/OFF button to return the VCR to TIMER STANDBY mode. If problems persist contact the SHARP Helpline on tel: 0990-274277 17 ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT AUDIO OUT button on the remote control. If you wish to change the sound output AUDIO OUT you can use the AUDIO OUT · button as follows: Press the AUDIO OUT button once. The LEFT audio channel will be sent to BOTH speakers. The RIGHT audio channel will be sent to BOTH speakers. The MONO track will be sent to BOTH speakers. L and R will disappear from the VCR display. Pressing the AUDIO OUT button a fourth time, normal Hi-Fi stereo sound will be heard. [. . . ] In the unlikely event of this product requiring repair, please contact the supplier from whom it was purchased. Where this is not possible, please contact the SHARP Helpline on the telephone number given below. This guarantee is offered as an additional benefit to your statutory rights and does not affect these rights in any way. No person has any authority to vary the terms or conditions of this guarantee. [. . . ]