User manual SHARP XE-A113

[. . . ] CAUTION: The cash register should be securely fitted to the supporting platforms to avoid instability when the drawer is open. CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. CAUTION: For a complete electrical disconnection pull out the mains plug. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] Key operation example Receipt print When selling a large quantity of items, it is convenient to use the multiplication entry method. Enter quantity using numeric keys and press the @ key before starting item entry as shown in the example below. When programmed to allow fractional quantity entries, you can enter up to four integers and three digit decimal, though the quantity is counted as one for sales reports. To enter a fractional quantity, use the decimal point key between integer and decimal, as 7P5 for entering 7. Key operation example Receipt print Single item cash sale (SICS) entry This function is useful when a sale is for only one item and is for cash. This function is applicable only to those departments that have been set for SICS or to their associated PLUs or subdepartments. The transaction is complete and the drawer opens as soon as you press the department key, d key or p key. Key operation example Receipt print If an entry to a department or PLU/subdepartment set for SICS follows the ones to departments or PLUs/subdepartments not set for SICS, it does not finalize and results in a normal sale. When you press it, the subtotal of all entries which have been made is displayed with the symbol " ". Subtotal will not be printed on a receipt on the current factory setting. Press the s key to get a subtotal, enter the amount tendered by your customer, then press the A key if it is a cash tender or press a cheque key (X or Y) if it is a cheque tender. When the amount tendered is greater than the amount of the sale, the register will show the change due amount with the symbol " " . Otherwise the register will show a deficit with the symbol " ". You now must make a correct tender entry. Cash tendering Key operation example Receipt print Cash or cheque sale that does not require tender entry Enter items and press the A key if it is a cash sale or press a cheque key if it is a cheque sale. the register will display the total sale amount. Key operation example Receipt print When programmed not to allow "direct non-tender finalization after tendering" (Job code 63, refer to page 56), you must always enter a tender amount. Enter items and press a credit key (c or b). Key operation example Receipt print You can perform mixed-tendering of cheque and cash, cash and credit, and cheque and credit. Key operation example Receipt print The cash register may be programmed for the following six VAT/tax systems. the cash register is preprogrammed as automatic VAT 1-4 system. Automatic VAT 1-4 system (Automatic operation method using programmed percentages) This system, at settlement, calculates VAT for taxable 1 through 4 subtotals by using the corresponding programmed percentages. [. . . ] Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. [. . . ]