User manual SHARP XE-A213

[. . . ] The cash register should be securely fitted to the supporting platforms to avoid instability when the drawer is open. The socket-outlet shall be installed near the equipment and shall be easily accessible. For a complete electrical disconnection pull out the mains plug. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. [. . . ] For a refund of a subdepartment item, enter the refund amount and press the f key, then press the corresponding direct PLU key, or enter the PLU code and press the f and p keys, then enter the refund amount and press the p key. Key operation example Receipt print You can enter a non-add code number such as a customer's code number and credit card number, a maximum of 16 digits, at any point during the entry of a sale. the cash register will print it at once. To enter a non-add code number, enter the number and press the N key. Key operation example Receipt print This feature is used to store and recall previous balances when a guest look-up (GLU) code is entered. You can accept re-order and issue bills with GLU codes. The GLU code refers to a code that is used whenever the guest check must be accessed for re-ordering or final payment. For new guest For a new guest, open a new guest check by assigning a GLU code. *2: Press the key to issue a guest check receipt (bill). a print sample is shown on the next page. Key operation example Receipt print Your register can be programmed to generate GLU codes automatically in a sequential fashion. If your register has not been programmed to do so, each GLU code must be entered manually. You can enter a maximum of 50 items for each GLU code. When the machine detects only area for five items are left on the GLU buffer, the operator display shows "5 ITEMS REMAIN" to warn you the number of items you can enter furthermore and the number decrease one by one. When an error message "BUFFER FULL" is displayed, you cannot enter an item anymore. By default, the details of items for each GLU are cleared when you press the key. You can clear the details when you press the ~ key as well as the key when you change the default setting. You can change the printing style so that previous balance (PBAL) and new balance (NBAL) are printed on guest check receipts. Additional ordering For making additional entries for a GLU already generated and not settled yet (hereinafter referred to as open GLU), enter the corresponding open GLU code and press the G key to recall the previous balance of the open GLU, then start item entries. By default, when entering an open GLU code, the cash register does not check if the clerk code is the same as the new order was made for the guest. If you want the register to check the clerk code, change the setting on "PLU level shift and GLU function parameters" (page 67). When the code is not the same, the register shows the error message "NO AUTHORITY" and does not accept additional order. [. . . ] Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. [. . . ]