User manual SHARP XE-A401

[. . . ] ELECTRONIC CASH REGISTER CAJA REGISTRADORA ELECTRONICA MODEL MODELO XE-A401 INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES How to Use the Instruction Manual Printing a Document To print the current document, click the Print button Finding words To find a complete word or part of a word in the current document, click here. Paging through a document page. To go to the next page, click the > button. To go to the previous Using Acrobat Reader This manual is in the format of Acrobat Reader. For the details of how to Browsing with bookmarks Bookmarks can mark parts of a document for quick access. The scroll bar also enables you to page through the document. The illustration above is a screen of Acrobat Reader 5. 0. WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] · Avoid dusty and humid storage places. · The printed text on the paper can discolor under conditions of high humidity and temperature, exposure to the direct sunlight, contact with glue, thinner or a freshly copied blueprint, and heat caused by friction from scratching or other means. · Be very careful when handling the thermal paper. If you want to keep a permanent record, copy the printed text with a photocopier. 64 4 Replacing the Paper Roll Be sure to use paper rolls specified by SHARP. The use of any other paper rolls other than those specified could cause paper jamming, resulting in register malfunction. Paper specification Paper width: 1. 75 ± 0. 02 in (44. 5 ± 0. 5 mm) Max. outside diameter: 3. 15 in (80 mm) Quality: Thermal paper · Be sure to set paper roll(s) prior to using your machine, otherwise it may cause a malfunction. Be careful to set the roll and cut the paper end correctly. If the top end of the paper roll is fixed with paste or tape, the paper may lose its color development ability in the pasted or taped area due to the deterioration of the heat-sensitive color development component of the paper surface. This may result in nothing appearing at this location when printing. Therefore, when setting a new paper roll in the machine, be sure to cut off approximately one revolution (approx. (How to set the paper roll) To the printer To the printer (How to cut the paper end) Correct Incorrect Correct Incorrect Removing the paper roll When a red dye appears on the paper roll, it is time to replace it. If you plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate place. Caution: The paper cutter is mounted on the printer (receipt side). Turn the mode switch to the REG position with the power cord connected. Cut the paper behind the printer and near the paper roll. Press the { key until the paper remaining in the printer comes out completely. 5. Remove the paper roll from the paper roll cradle of the receipt side. Do not pull the paper through the printer. Removing the journal paper roll: Area to cut 1. Turn the mode switch to the REG position with the power cord connected. Press the } key to advance the journal paper until its printed part is out of the way. 4. Cut the paper and remove the take-up spool. Cut the paper behind the printer and near the paper roll. [. . . ] (3) El visualizador se ilumina, pero la registradora no responde a los registros. (4) No se emiten recibos. (5) No sale el papel del registro diario. (6) La impresión no es normal. 39 Tabla de mensajes de error Cuando se visualicen los siguientes mensajes de error, pulse la tecla l y tome la acción apropiada de acuerdo con la tabla siguiente. SUBIDO NO HAY PAPEL Estado de error Error de registro Error de operación incorrecta Se ha introducido un código no definido. [. . . ]