User manual SHARP XL-3000

[. . . ] This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. Q Warning: To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Q CAUTION Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. Caution: After performing repeat or random play, be sure to press the ton. Otherwise, the disc will play continuously. Z When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, playback will start when you release the button. By specifying tracks from 1 to 99, you can choose up to 20 selections for playback in the order you like. Press the MEMORY/SET(MEMORY) button to save the track number. Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. The new tracks will be stored after the last track of the original programme. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sports or music, etc. when tuned to an RDS station , "RDS" and the station name will be displayed. "TP" (Traffic Programme) will appear on the display when the received broadcast carries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic information is on air (see page 26). "EON" will appear whilst the EON (Enhanced Other Networks information) data is broadcast. You can control the RDS by using the remote control only. Frequency When you are tuning in to a station other than an RDS station or to an RDS station which sends weak signal, the display will change in the following order: You can search for and receive the following PTY, TP and TA signals. nEWS Short accounts of facts , events and publicly expressed views , reportage and actuality. Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. If you have already stored some stations in memory, the number of new stations you can store will be less. Press and hold down the ASPM button for at least 3 seconds. [. . . ] Set the sleep time (see left, steps 1 - 2). Your system will enter the power stand-by mode automatically after the preset time has elapsed. The volume will be turned down 1 minute before the sleep operation finishes. To cancel the sleep operation: Press the ON/STAND-BY button whilst the sleep timer is set. [. . . ]