User manual SHARP XL-DV50 QUICK START GUIDE

[. . . ] Hnvisa till sidorna i till viii och V-1 till V-22. Leggere le pagine i a viii e I-1 a I-22. Raadpleeg de bladzijden i t/m viii en N-1 t/m N-22. Favor consultar as pginas i a viii e P-1 a P-22. [. . . ] Connect the black wire to the minus () terminal, and the red wire to the plus (+) terminal. Use speakers with an impedance of 4 ohms or more, as lower impedance speakers can damage the unit. Do not mistake the right and the left channels. The right speaker is the one on the right side when Incorrect you face the unit. Do not let the bare speaker wires touch each other. Do not allow any objects to fall into or to be placed in the bass reflex ducts. You may be injured. The first time the unit is plugged in, the unit will enter the demonstration mode. To cancel the demonstration mode, press the DEMO button (remote control) during power stand-by mode. The unit will enter the low power consumption mode. To return to the demonstration mode, press the DEMO button again. Connecting iPod to a TV Speaker connection The iPod with photo and video can be viewed by connecting to a TV/monitor. If the TV/monitor has a video input, connect it to the VIDEO OUT socket on the rear of the unit. 2 Within 5 seconds, press the VOLUME (+ or ) button to adjust the bass. Treble control 1 Press the BASS/TREBLE button to select "TREBLE". 2 Within 5 seconds, press the VOLUME (+ or ) button to adjust the treble. 0. 2 m - 6 m (8" - 20' ) Equaliser When the EQUALIZER MODE button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER MODE button repeatedly until the desired sound mode appears. FLAT GAME No equalization. For game. CLASSIC For classical music. For jazz. VOCAL E-5 JAZZ Setting the clock (Remote control only) Listening to the iPod Supported iPod models: iPod nano (software 1. 2 above) iPod mini (software 1. 2 above) iPod (5th generation) (software 1. 3 above) (Dock connector equipped Click Wheel model) iPod (4th generation) (software 3. 0. 2 above) (Dock connector equipped Click Wheel model) iPod nano (2nd generation) (software 1. 0. 0 above) iPod nano (3rd generation) (software 1. 0. 3 above) iPod nano (4th generation) (software 1. 0. 3 above) iPod classic (software 1. 0. 3 above) iPod touch (software 1. 1 above) iPod touch (2nd generation) (software 2. 1 above) Caution: Please update your iPod unit to the latest software version from Apple's homepage before using it. Notes: Once the iPod is connected to the unit it will begin charging. The iPod unit cannot be charged whilst the main unit is in the stand-by mode or during USB mode. Auto power on function: When you press any of the following buttons, the unit turns on. iPod button on the remote control: The unit turns on and the iPod function is activated. / button on the main unit: The unit turns on and playback of the last function will start (iPod, CD, TUNER, USB, AUDIO IN). CD USB In this example, the clock is set for the 24-hour (0:00) display. 1 Press the ON/STAND-BY button to turn the power on. 3 Within 10 seconds, press the MEMORY button. Press the or button to select 24-hour or 12hour display and then press the MEMORY button. "0:00" "AM 12:00" The 24-hour display will appear. [. . . ] The TV/monitor's input selection is not properly set. The iPod is not making full contact with the iPod connector. Using 3rd generation iPod. Remove the iPod, USB memory device and disc from the un it. Then, set the unit to the power stand-by mode. [. . . ]