User manual SHARP XL-DV60H

[. . . ] DVD-MICRO-SYSTEM MICRO-CHANE DVD CADENA MICRO CON DVD DVD MIKRO SYSTEM SISTEMA DVD MICRO DVD MICRO-SYSTEEM MICROSSISTEMA DVD DVD MICRO SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL XL-DV60H BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE MANEJO BRUKSANVISNING MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING MANUAL DE OPERAO OPERATION MANUAL !DVD-Micro-System XL-DV60H besteht aus XL-DV60H (Hauptgert), CP-DV60HF (Front-Lautsprecher) und CP-DV60HSW (Subwoofer). Micro-chane DVD XL-DV60H compose de XL-DV60H (appareil principal), CP-DV60HF (enceintes avant) et CP-DV60HSW (woofer auxiliaire). Cadena micro con DVD XL-DV60H que consta de XL-DV60H (aparato prinpal), CP-DV60HF (altavoces delanteros) y CPDV60HSW (altavoz de subgraves). [. . . ] Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AA" size batteries (UM/ SUM-3, R6, HP-7 or similar). Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs. Keep the remote control away from moisture, heat, shock, and vibrations. XL-DV60H ENGLISH 1 2 3 3 Check the remote control after checking all the connections (see pages 11 - 15). Point the remote control directly at the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Replace all old batteries with new ones at the same time. Remove the batteries if the unit is not to be used for long periods of time. This will prevent potential damage due to battery leakage. Do not use rechargeable batteries (nickel-cadmium battery, etc. ). Installing the batteries incorrectly may cause the unit to malfunction. Battery removal: Remove the battery cover. Push each battery toward the terminal and take them out. Preparation for Use " Test of the remote control 4 5 6 7 8 Remote sensor 0. 2 m - 6 m (8" - 20') battery E-16 05/3/4 XL-DV60H(H)_E. fm TINSZA042SJZZ XL-DV60H General control " Bass control (X-BASS) When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (XBASS) button. ENGLISH " Equaliser Preparation for Use When the EQUALIZER (EQ-MODE) button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER (EQ-MODE) button repeatedly until the desired sound mode appears. FLAT ROCK The sound is not modified. For jazz. 7 " Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. CLASSIC POPS VOCAL JAZZ 0 . . . . . 29 30 (MAXIMUM) " Surround TINSZA042SJZZ Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. " Subwoofer volume control Press the SHIFT button on the remote control, and adjust the volume. 0 . . . . . 29 30 (MAXIMUM) To enter the surround mode, press the SHIFT button and SUB TITLE/ SURROUND button on the remote control. Note: When the input source is "TUNER" or "AUX", the surround mode is not available. E-17 05/3/4 XL-DV60H(H)_E. fm TINSZA042SJZZ Setting the clock 3 Within 30 seconds, press the PRESET ( or ) button to adjust the hour and then press the MEMORY/SET button. XL-DV60H ENGLISH 1 2 Press the PRESET ( or ) button once to advance the time by 1 hour. [. . . ] Whilst pressing down the DVD/CD button and the 2 button, press the ON/STAND-BY button until "CLEAR" appears. " Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (laser pickup, etc. ) or on the transmitter on the remote control. Condensation may cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. Caution: When you reset, all data is deleted and the settings return to the default. [. . . ]