User manual SHARP XL-E171DVH

[. . . ] ENGLISH ● XL-E171DVH DVD Hi Fi Component System consisting of XL-E171DVH (main unit) and CP-E171 (speaker system). Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Special Note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. [. . . ] ● This system supports MPEG 1 Layer 3 and VBR files. ● During VBR file playback, time counter in the display may differ from its actual playback time. ● Bitrate which is supported by MP3 is 32 ~ 320 kbps. WMA: WMA files are Advanced System Format files that include audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player. ● Bitrate which is supported by WMA is 64 ~ 160 kbps. The following playback functions are the same as DVD or VCD operations. 15 To locate the beginning of a chapter (track) (skip) . 16 Fast forward/Fast backward (search) . 20 ■ ■ To start playback from the desired point (direct play) To start playback from the desired point (direct play) To play by specifying time (time search): To select and play the desired track: Whilst in the stop or playback mode, press the Direct Search buttons to select the track number. To select track 14: Press “10+” and “4”. TV screen SELECT TRACK: 14/30 1 During playback, press the DIRECT button twice TV screen GO TO _: __:__ 2 Specify the time with the Direct Search buttons. Unit display To play by specifying time (time search): ● Enter minutes and seconds. ● To specify 1 hour 23 minutes and 40 seconds, enter “12340”. ● If you enter the wrong number, start over from step 1. ● You can check the total playback time of the track by refer to the page 20. 1 During stop or playback mode, press the DIRECT button once and “DISC GO TO” appear on TV screen. TV screen DISC GO TO: - -:-- To select and play the desired track: 1 Whilst in the stop or playback mode, press the Direct Search buttons or press DIRECT button and then enter the desired track number(s). TV screen ---/150 2 Specify the time with the Direct Search buttons. ● Enter minutes and seconds. ● To specify 1 hour 23 minutes and 40 seconds, enter “8340”. ● If you enter the wrong number, start over from step 1. Notes: ● Direct play feature is disabled on some discs. ● Some disc cannot play from the specified point. ● Time search feature is disabled on some discs. Total of tracks If the desired track is 25, press “0”, “2” and “5”. 2 Playback will start automatically on selected track. [. . . ] 2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. ● Do not write on either side of the disc, particularly the non-label side from which signals are read. [. . . ]