User manual SHARP XL-HP404E

[. . . ] MODEL XL-HP404E MICRO COMPONENT SYSTEM This Quick Start Guide will help you to correctly install and operate your system. If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. [. . . ] Place the CD on the disc tray 1, label side up. 12 cm (5") 8 cm (3") Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING ( or ) button to tune in to the desired station. When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. 2 To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. G " " will appear when an FM broadcast is in stereo. FM stereo mode indicator 4 5 6 Press the OPEN/CLOSE button to close the disc tray 1. FM stereo receiving indicator You can place discs on trays 2 - 5 by following steps 2 - 4. Press the / button to start playback. Listening to a cassette tape I If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Set the unit to the stand-by mode and turn the power on again. If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it. I Clearing all the memory (reset) 1. [. . . ] / button to choose one side or button to listen to side A, or the button This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. I Maintenance Routine maintenance is required for continued optimum performance, refer to the operation manual (page 32). XLHP404E_QG. pm 2 03. 12. 4, 4:24 PM [. . . ]