User manual SHARP XL-S10

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MICRO COMPONENT SYSTEM MODEL XL-S10 Micro Component System consisting of XL-S10 (main unit) and CP-S10 (speaker system). XL-S10 OPERATION MANUAL XL-S10 SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] The new tracks will be stored after the last track of the original program. Opening the CD compartment automatically cancels the programmed sequence. Even if you press the ON/STAND-BY button to enter the stand-by mode or the function is changed from CD to some other function, the programmed selections will not be cleared. During program operation, random play is not possible. 17 CD Playback XL-S10 Listening to the radio 1 2 Press the ON/STAND-BY button to turn the power on. Press the FUNCTION button until "FM" or "AM" appears on the display. When operating with the remote control, press the TUNER (BAND) button to select "FM" or "AM". Press the TUNING ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. When radio interference occurs, auto scan tuning may stop automatically at that point. Auto scan tuning will skip weak signal stations. To stop the auto tuning, press the TUNING button again. 3 Radio To receive an FM stereo transmission: Press the FUNCTION (TUNER (BAND)) button to display the "ST" indicator. " " will appear when an FM broadcast is in stereo. If the FM reception is weak, press the FUNCTION (TUNER (BAND)) button to extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer. FM stereo mode indicator After use: Press the ON/STAND-BY button to enter the power stand-by mode. FM stereo receiving indicator 18 Listening to the memorized station " Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) XL-S10 " To recall a memorized station Press the PRESET ( or ) button for less than 0. 5 seconds to select the desired station. 1 2 3 Perform steps 1 - 3 in "Listening to the radio" on page 18. Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. Within 5 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. Within 5 seconds, press the MEMORY/SET (MEMORY) button to store that station in memory. [. . . ] The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. " CD player Type Signal readout D/A converter Compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20, 000 Hz 90 dB (1 kHz) " General Power source Power consumption Dimensions AC 120 V, 60 Hz 28 W Width: 6-5/16" (160 mm) Height: 9-1/2" (242 mm) Depth: 9-7/8" (250 mm) 5. 1 lbs. (2. 3 kg) Frequency response Dynamic range " Cassette deck Frequency response Signal/noise ratio Wow and flutter 125 - 8, 000 Hz (normal tape) 50 dB (recording/playback) 0. 3 % (WRMS) References Weight " Amplifier Output power 5 watts minimum RMS per channel into 4 ohms from 100 Hz to 15 kHz, 10% total harmonic distortion Speakers: 4 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Subwoofer pre-out (audio signal): 500 mV/47 k ohms Input terminals Video/Auxiliary (audio signal): 500 mV/47 k ohms " Speaker Type Maximum input power Rated input power Impedance Dimensions 4" (10 cm) full-range speaker (magnetically shielded) 10 W 5W 4 ohms Width: 5-1/8" (130 mm) Height: 9-7/16" (240 mm) Depth: 6-5/16" (161 mm) 3. 3 lbs. (1. 5 kg)/each Output terminals " Tuner Frequency range FM: 87. 5 - 108. 0 MHz AM: 530 - 1, 720 kHz Weight 30 CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. [. . . ]