User manual SHARP XL-UR2110H

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. XL-UR250H(BK) Micro Component System consisting of XL-UR250H(BK) (main unit) and CP-UR250H(BK) (speaker system). [. . . ] For MP3/WMA files, please put ". MP3" ". WMA" extension. Files cannot be played back if there is no MP3/WMA extension. Playlists are not supported on this unit. This unit can display Folder Name or File Name up to 32 characters. Maximum total number of MP3/WMA files is 65535. Maximum total number of folders is 128 not inclusive of root directory. Folders with non playable files are also counted. The display playback time may not be displayed correctly when playing back a variable bitrate file. Time display cannot be changed by the DISPLAY button. The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode. WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back. XL-UR250H(BK) XL-UR2110H(BK) To cancel repeat play: Press the / button again until " " will disappear. The tracks can be played in random order automatically. To random play all tracks: Press the RANDOM button on the remote control. File Erase To cancel random play: Press the / button. Notes: If you press the button during random play, you can move to the track selected next by the random operation. However, the button does not allow you to move to the previous track. It will go to the beginning of the current track instead. In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) Note: ( ) When folder mode is on, the selected play mode can be used for the files in the selected folder only. Notes: This unit only supports "MPEG-1 Audio Layer-3" format. (Sampling Frequency is 32, 44. 1, 48kHz) "MPEG-2 Audio Layer-3" , "MPEG-2. 5 Audio Layer-3" and MP1, MP2 format are not supported. Programme playback for USB memory is not available. [. . . ] Caution: Do not use chemicals for cleaning (petrol, paint thinner, etc. ). Do not apply oil to the inside of the unit. It may cause malfunctions. ( * )This power consumption value is obtained when the demonstration mode is cancelled in the power stand-by mode. Refer to page 11 to cancel the demonstration mode. Amplifier (XL-UR250H(BK)) Output power PMPO: 660 W MPO: 330 W (165 W + 165 W) (DIN 45 324) RMS: 160 W (80 W + 80 W) (DIN 45 324) RMS: 128 W (64 W + 64 W) (DIN 45 500) Speakers: 6 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Subwoofer pre-out (audio signal): 200 mV/10 k ohms at 70 Hz Video/Auxiliary (audio signal): 500 mV/47 k ohms Output terminals Input terminals 42 XL-UR250H(BK) XL-UR2110H(BK) Amplifier (XL-UR2110H(BK)) Output power PMPO: 160 W MPO: 80 W (40 W + 40 W) (DIN 45 324) RMS: 40 W (20 W + 20 W) (DIN 45 324) RMS: 26 W (13 W + 13 W) (DIN 45 500) Speakers: 4 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) Subwoofer pre-out (audio signal): 200 mV/10 k ohms at 70 Hz Video/Auxiliary (audio signal): 500 mV/47 k ohms CD player Type Signal readout D/A converter Frequency response Dynamic range 5-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup D/A Multi-bit converter 20 - 20, 000 Hz 90 dB (1 kHz) FM: 87. 5 - 108 MHz AM: 522 - 1, 620 kHz 40 presets (AM and FM). Output terminals Tuner Frequency range Support preset memory Input terminals USB USB host interface Support file Complies with USB 1. 1 (Full Speed)/ 2. 0 Mass-Storage-Class. [. . . ]