User manual SHARP XR1S CONNECTIONS

[. . . ] Setting up the Projector (Continued) Screen Size and Projection Distance NORMAL Mode (4:3) Picture (Screen) size Diag. [ ] Width Height 280 (711 cm) 569 cm (224 ) 250 (635 cm) 508 cm (200 ) 200 (508 cm) 406 cm (160 ) 150 (381 cm) 305 cm (120 ) 100 (254 cm) 203 cm (80 ) 84 (213 cm) 171 cm (67 ) 72 (183 cm) 146 cm (58 ) 60 (152 cm) 122 cm (48 ) 40 (102 cm) 30 (76 cm) 81 cm (32 ) 61 cm (24 ) Projection distance [L] Minimum [L1] Maximum [L2] Distance from the bottom of the image to the lens center [H] 61. 5 cm ( 24 7/32 ) 54. 9 cm ( 21 5/8 ) 427 cm (168 ) 9. 8 m (32 2 ) 381 cm (150 ) 8. 8 m (28 9 ) 305 cm (120 ) 7. 0 m (23 0 ) 229 cm (90 ) 152 cm (60 ) 128 cm (50 ) 110 cm (43 ) 91 cm (36 ) 61 cm (24 ) 46 cm (18 ) 5. 3 m (17 3 ) 3. 5 m (11 6 ) 2. 9 m (9 8 ) 2. 5 m (8 3 ) 2. 1 m (6 11 ) 1. 4 m (4 7 ) 1. 1 m (3 5 ) 8. 1 m (26 8 ) 6. 1 m (20 0 ) 4. 1 m (13 4 ) 3. 4 m (11 2 ) 2. 9 m (9 7 ) 2. 4 m (8 0 ) 1. 6 m (5 4 ) 1. 2 m (4 0 ) 43. 9 cm ( 17 33. 0 cm ( 12 22. 0 cm ( 8 18. 5 cm ( 7 15. 8 cm ( 6 8. 8 cm ( 3 6. 6 cm ( 2 19/64 31/32 21/32 17/64 15 ) ) ) ) /64 ) ) ) 13. 2 cm ( 5 3/16 ) 29/64 19/32 : Picture size (diag. ) (in/cm) L: Projection distance (m/ft) L1: Minimum projection distance (m/ft) L2: Maximum projection distance (m/ft) H: Distance from the lens center to the bottom of the image (cm/in) The formula for picture size and projection distance [m/cm] [Feet/inches] L1 (m) = 0. 03503 L1 (ft) = 0. 03503 / 0. 3048 L2 (m) = 0. 04064 L2 (ft) = 0. 04064 / 0. 3048 H (cm) = - 0. 21971 H (in) = - 0. 21971 / 2. 54 STRETCH Mode (16:9) Picture (Screen) size Diag. [. . . ] (See page 33. ) AUDIO INPUT terminal Connecting an audio cable (Shared audio input terminal for INPUT 1, 2 and 3. ) (See pages 23, 24 and 25. ) 21 Samples of Cables for Connection · For more details of connection and cables, refer to the opeation manual of the connecting equipment. · You may need other cables or connectors not listed above. Equipment Computer Input Signal RGB video ø3. 5 mm stereo audio cable Computer audio Audio-visual equipment 3 RCA (Component) to 15-pin D-sub cable (optional, AN-C3CP) INPUT1 AUDIO INPUT Cable RGB/USB cable (supplied) Terminal on the projector INPUT1 Component video S-video cable (commercially available) S-video Video cable (commercially available) Video ø3. 5 mm minijack to RCA audio cable (commercially available) Audio INPUT2 INPUT3 AUDIO INPUT Camera/video game Component video Cables for a camera or a video game/3 RCA INPUT1 (Component) to 15-pin D-sub cable (optional, AN-C3CP) S-video Cables for a camera or a video game INPUT2 Video Cables for a camera or a video game INPUT3 Cables for a camera or a video game/ø3. 5 mm minijack to RCA audio cable (commercially available) Audio AUDIO INPUT 22 Connecting to a Computer Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector and then the other devices. When connecting a computer, be sure that it is the last device to be turned on after all the connections are made. Be sure to read the operation manuals of the devices to be connected before making connections. Supplied accessory To audio output terminal To RGB output terminal To USB terminal RGB/USB Cable To USB terminal To INPUT1 To AUDIO terminal INPUT terminal Connections * ø3. 5 mm stereo or mono audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ) RGB/USB Cable * When using the ø3. 5 mm mono audio cable, the volume level will be half of when using the ø3. 5 mm stereo audio cable. Note · When connecting with USB cable, you can use the remote control as a mouse for controlling cursor. · See page 59 "Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions to not work. · A Macintosh adaptor may be required for use with some Macintosh computers. · Depending on the computer you are using, an image may not be projected unless the signal output setting of the computer is switched to the external output. [. . . ] The image quality is highest in order of the component signal, the S-video signal and the video signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1) on the projector for video connection. When using a 3 RCA (Component) to 15-pin D-sub cable To audio output terminal To component output (Y, CB/PB, CR/PR) terminal To INPUT1 terminal To AUDIO INPUT terminal 3 RCA (Component) to 15-pin D-sub cable (optional: AN-C3CP) ø3. 5 mm minijack to RCA audio cable (commercially available) When using an S-video cable To audio output terminal To S-video output terminal To INPUT2 To AUDIO terminal INPUT terminal ø3. 5 mm minijack to RCA audio cable (commercially available) S-video cable (commercially available) 24 When using a composite video cable To audio output terminal To video output terminal To INPUT3 To AUDIO terminal INPUT terminal ø3. 5 mm minijack to RCA audio cable (commercially available) Composite video cable (commercially available) Connections Note · ø3. 5 mm minijack to RCA audio cable (commercially available) is required for audio input. Connecting the Power Cord Plug the supplied power cord into the AC socket on the side of the projector. AC socket 25 [. . . ]