User manual SHARP YO-500

[. . . ] This Organizer is not designed to transfer/receive e-mails by using the E-mail addresses you will store. The information provided in this manual is subject to change without notice. All company and/or product names are trademarks and/or registered trademarks of their respective manufacturers. Do not carry the Organizer in the back pocket of slacks or trousers. [. . . ] Skip entering time and start to enter letters for the details as described in step 5. The hour and minute should each consist of 2 digits. The time can be set using either the 12-hour or 24-hour format. When you move the cursor to the next entry field, the time is displayed in the format selected in the Clock mode. If an attempt is made to store an invalid time, you cannot move the cursor to the next entry field. Enter the correct time and follow the next procedure. Enter the time and detail following the procedure for "(1) Enter the desired date in Calendar mode" (from step 4) on this page. (3) Enter the desired date directly When the date is not close to the currently displayed date, the following method is more convenient than the previous 2 ways. You can set an alarm while you are entering or editing the schedule item. When you press 2nd ALARM while " " is displayed, the alarm will be canceled and " " will disappear from the display. If the alarm time you attempt to enter has already passed, the message "ALARM TIME ELAPSED!(1) Summarizing an expense report for a specific day <Example> Specify the date, April 5, 2001. You bought flight tickets for a business trip for $1, 200. The month and the day must be entered using 2 digits and the year using 4 digits. For single digit months or days, enter "0" before the single digit. The date can be changed by pressing either 2. Press 2nd EXPENSE to enter the Expense report mode. Then press NEXT repeatedly to check if any other listings are scheduled for the current day. CE , then press 2nd NEXT (or 2nd PREV ) to display the first (or last) listing in chronological order. After the last (or first) listing in chronological order has been found, "NOT FOUND!Deleting or modifying data during operation can produce unnecessary space in the memory of the Organizer. Delete unnecessary space and free up memory, when the Organizer displays "MEMORY FULL! [. . . ] Responsible Party: SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 TEL: 1-800-BE-SHARP Tested To Comply With FCC Standards FOR HOME OR OFFICE USE WARNING ­ FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]