User manual SHERWOOD SD-871

[. . . ] SD-871 Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. FCC INFORMATION (FOR U. S. A. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] (Program playback is suspended. ) Clearing the programmed tracks [ To clear one by one ] · During programming, press the CLEAR button. RC · Each time this button is pressed, the programmed tracks are cleared one by one in the opposite order. · Once program playback is performed, you cannot clear one by one. [ To clear all programmed tracks ] · During programming or when the STOP ( ) button is pressed to stop program playback, press the PROGRAM button. RC · Then the programmed tracks are all cleared. · Opening the disc tray clears all programmed tracks. 27 BOOKMARK PLAYBACK · The bookmark function allows you to mark the desired scene/point that you can go to quickly. Up to 14 bookmarks can be stored in the memory. Storing a bookmark in the memory During playback, press the MARKER button. 1 RC Mark mode Recall mode MARK 01 GOTO 01 TOTAL 00/14 · Then the bookmark menu is displayed on the TV screen. · When the MARKER button is pressed again, the bookmark menu disappears. Total number of the stored bookmark The stored bookmark number The bookmark number to be stored 2 Press the CURSOR RC / buttons to select the mark mode. · Each time the CURSOR or button is pressed, the mark mode or the recall mode is selected. 3 Press the CURSOR RC / buttons to select the desired bookmark number. At the desired scene/point, press the ENTER button. 4 RC · Then the bookmark is stored in the memory. · Repeat the above steps 1~4 until the desired scenes/ points are marked. · When the ENTER button is pressed at a previously used bookmark number, the new scene/point will be marked with that bookmark. Recalling a bookmarked scene/point To select the recall mode, perform the above steps 1 and 2. 1 2 Press the CURSOR button. RC / buttons to select the bookmark number that you want to recall and press the ENTER RC · Playback resumes from the scene/point corresponding to the selected bookmark. Notes: · Opening the disc tray or turning the power off clears all stored bookmarks. · The bookmark function may not work with some discs. 28 CHANGING THE AUDIO LANGUAGE · It is possible to change the audio language to a different language from the one selected at the initial settings. (For details, refer to "SETTING THE LANGUAGE SETUP" on page 43. ) This operation works only with DVDs on which multiple audio languages are recorded. · During playback, press the AUDIO button. RC · Then the audio language menu is displayed on the TV screen for several seconds. · Each time this button is pressed, the audio language changes as follows: Example: AUDIO 1/3 : D 5. 1 ENGLISH AUDIO 2/3 : D 2CH ENGLISH AUDIO 3/3 : D 2CH FRENCH Selected audio language number Total number Selected audio language Sound recording system Notes: · You cannot select the preferred audio language when the disc contains only one. · When the disc is changed, etc. , the language heard is the one selected at the initial settings. If this is not recorded on the disc, only the available language on the disc will be heard. · On some discs, an audio language except the selected one at the initial settings may be heard. · In case of some DivX files on which multiple audio languages are recorded, you can also change the audio language with pressing the AUDIO button. (However, this operation may work differently. ) CHANGING THE SUBTITLE LANGUAGE · It is possible to change the subtitle language to a different language from the selected one at the initial settings. (For details, refer to "SETTING THE LANGUAGE SETUP" on page 43. ) This operation works only with DVDs on which multiple subtitle languages are recorded. · During playback, press the SUBTITLE button RC · Then the subtitle language menu is displayed on the TV screen for several seconds. · Each time this button is pressed, the subtitle language changes as follows: Example: SUBTITLE 01/02 : ENGLISH SUBTITLE 02/02 : FRENCH SUBTITLE OFF Selected subtitle language number Total number Selected subtitle language Subtitle display off mode Notes : · You cannot select the preferred subtitle language when the disc does not contain the available language. · When the disc is changed, etc. , the displayed language is the selected one at the initial settings. If this is not recorded on the disc, the available language on the disc may be displayed. · On some discs, a subtitle language except the selected one at the initial settings may be displayed. · When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap each other on the TV screen. [. . . ] · Set the DVD AUDIO AREA to DVD VIDEO. (Refer to "When selecting the DVD AUDIO AREA" on page 42. ) No playback of DVD Video contents on a DVD Audio. No playback of the desired area/layer on a SACD. Remote control unit does not operate. · DVD AUDIO AREA is set to DVD AUDIO. · The desired area/layer is not selected. · Select the desired. [. . . ]