User manual SHOPRIDER SFB-18

[. . . ] APT Power Assist Folding Electric Bicycle USER MANUAL Model: SFB-18 ® Table of Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 User Guidance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5~7 Batteries and Charging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8~11 Steps to fold the E-Bike. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12~13 Steps to restore the E-Bike. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14~15 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Disclaimer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2008/4/30 2 Introduction Thank you for purchasing the SUNRUNNER® APT® Power Assist Folding Electric Bicycle (hereinafter referred to as "E-Bike") is designed and manufactured by PIHSIANG MACHINERY MFG. (hereinafter referred to as "PMMC"). The user's manual contains important information concerning the operation and the safe use of your E-Bike. Please read this manual carefully and thoroughly before riding your E-Bike and make sure that you fully understand the operation of the E-Bike as instructed in this manual. [. . . ] Depress the key to release the lock and use the other hand to push the battery case out from the battery holder. 3. Remove the battery case. Mounting Battery Case 1. Please secure the battery case holder with one hand and slide the battery case onto the rail all the way down to lock the battery case as shown. Note: If the battery case can be removed without depressing the key, this means that the battery case has not been properly locked. The battery case will be locked and can't be removed when the key is in the vertical position. 2008/4/30 8 Battery and Charging Steps to charge the Battery 1. Switch your E-Bike off on the main switch of battery case. Dismount the battery case and then place it at a ventilated place to be charging. Swivel the charging port cover of battery case and then connect the charger plug of the charger. Plug the power plug of the charger into secure power source to start charging battery. Note: Ensure that the charger plug is dry and securely connected to the charger port of battery case. Power Plug Charger Plug Operating Instruction 1. Must assure the input voltage is between 100V~240V. Must assure the battery to be charged is a LiFePO4 (Lithium Iron Phosphate Based) Battery Pack supplied by PMMC. Make sure the power cord, battery cable, and battery terminals are in good condition. Make sure the connecting battery rating is the same as the charger output voltage (24V). While charging, the charging LED will display a RED light. When the light turns GREEN, the battery is fully charged. Charger LED Indication 1. LED (GREEN) ­ Power On, when not connected to the batteries. LED (GREEN) ­ Fully Charged, when connected to the batteries. Trouble Shooting 1. If the LED light is "OFF" all the time while charging: Check if the power connections are in good condition. If the LED light is still off all the time while charging, the battery charger may be malfunctioning. Please consult your authorized dealer for further assistance. [. . . ] Battery case with an empty As the last battery indicator light charge. start flashing then the battery case must be recharged as soon as possible, or the power assist will be discontinued after approximately 1. 2 Mi further. Poor traveling range Frequent riding on gradients, poor tire pressure, battery case with insufficient charge, or battery aging, etc. Unusual motor/gear Decrease chance to ride on gradients to check if a longer range is acquired, fill up tire pressure to 50 PSI, fully charge the battery daily after use, or replace a new battery case, etc. [. . . ]