User manual SHURE PSM 900 REV 3

[. . . ] All new, patent-pending CueMode allows the sound engineer to monitor different stage mixes with the touch of a button. [. . . ] All new, patent-pending CueMode allows the sound engineer to monitor different stage mixes with the touch of a button. Precision front-end RF filtering significantly reduces dropouts from RF interference, and the enhanced digital stereo encoder provides excellent stereo separation and audio clarity. APPlicAtionS Touring Sound House Of Worship Broadcast Theater Product HigHligHtS Superb Audio Quality Robust RF Performance Category-leading features: CueMode (patent pending), Scan and Sync, Active RF Gain Control System Specifications RF Carrier Range Compatible Frequencies Tuning Bandwidth Operating Range (environment dependent) Audio Frequency Response Stereo Separation Signal-To-Noise Ratio (A-Weighted) Total Harmonic Distortion (ref. ±34 kHz deviation @1 kHz) Companding Spurious Rejection (ref. It offers state-of-art technology including CueMode (patent pending), RF Sync, and RF mute switch for easy setup and operation. Connections include balanced 1/4" and XLR, loop out, and headphone out. Includes rack-mounting kit, front or back mountable antennas, and power supply. RF Output Power RF Output Impedance Net Weight Dimensions Power Requirement (RF on, 100 mW power mode, no audio) Audio Input Connector Type Polarity Configuration Impedance Nominal Input Level Maximum Input Level Pin Assignments Phantom Power Protection Audio Output Connector Type Configuration Impedance selectable: 10, 50, 100 mW (regionally dependent) 50 (typical) 850 g 197 mm x 166 mm x 42 mm 15 Vdc at 550 mA, supplied by external power supply Combination XLR and 6. 35 mm (1/4") TRS XLR: Non-inverting (pin 2 positive with respect to pin 3) 6. 35 mm (1/4") TRS: Tip positive with respect to ring Electronically balanced 70. 2 k (actual) switchable: +4 dBu, ­10 dBV +4 dBu: +23. 3 dBu ­10 dBV: +12. 5 dBu XLR: 1=ground, 2=hot, 3=cold 6. 35 mm (1/4") TRS: Tip=hot, Ring=cold, Sleeve=ground up to 60 V DC 6. 35 mm (1/4") TRS Electronically balanced Connected directly to inputs www. shure. com ©2010 Shure Incorporated [. . . ] Connections include balanced 1/4" and XLR, loop out, and headphone out. [. . . ]