User manual SIEMENS ATON CL700 IP

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] 56 Setting the handset Setting the alarm clock Precondition: The date and time have already been set (page 8). Deactivating the wake-up call/ repeating after a pause (snooze mode) Precondition: A wake-up call is sounding. or Snooze Press the display key or any key. The wake-up call is deactivated and then repeated after 5 minutes. After the second repetition the wake-up call is deactivated completely. v Alarm Clock Change multiple line input: Activation: Select On or Off. Time: Enter the wake-up time in 4-digit format. A wake-up call with the selected ringer melody is signalled on the handset. If no key is pressed, the wake-up call is repeated twice at five minute intervals and then switched off. During a call, the wake-up call is signalled by a short tone. Activating/deactivating the alarm clock and setting the wake-up time Restoring the handset default settings You can reset any individual settings and changes that you have made. This will not affect entries in the directory, calls list, SMS lists or the handset's registration to the base station. v Handset Reset Handset Yes Press the display key. You can cancel the restoring process by pressing a or the display key No. a Press and hold (idle status). 57 Base station settings Base station settings The base station settings are carried out using a registered Aton CL300 V2 handset. Restoring the base station to factory settings Resetting the base station via the menu The individual settings are reset. Only the date and time and the system PIN are retained. v Settings Base Base Reset ~ Enter the system PIN and press OK. Yes Protecting against unauthorised access Protect the system settings of the base station with a PIN known only to yourself. The system PIN is one of the items you must enter when registering and deregistering a handset, changing the VoIP settings or restoring to factory settings. Press the display key to confirm. Changing the system PIN You will have to enter the system PIN e. g. when you register a handset with the base station, change the VoIP settings or start the Web configurator. You can change the base station's 4-digit default system PIN ("0000") to a 4-digit system PIN known only to yourself. v Settings Base System PIN ~ Enter current system PIN and press OK. ~ Now re-enter the new system PIN and press OK. For security reasons, "****" is displayed instead of the system PIN. a Press and hold (idle status). Resetting the base station using a key on the base station All individual settings and the system PIN are reset. [. . . ] If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, 99 Appendix write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. [. . . ]