User manual SIEMENS EF790501

[. . . ] . 3-24 Instruction manual EF 79. . 5650035793 S110485 1 EF 79. . ø 14, 5 ø 14, 5 ø 23/18 ø 18/12 Ø = cm 2 Table of contents Important information . Familiarising yourself with the appliance . Cooking with the electronic boil start control . [. . . ] Cook with small quantities of water This saves energy and helps vegetables to retain vitamins and minerals. Switch down to a lower heat setting in good time. For longer cooking times, switch off the hotplate 5 to 10 minutes before the end of the cooking time. As long as the residual heat indicator H is lit, you can still use the hotplate, which has already been switched off, for warming up or melting food. Cooking with small quantities of water Lowering the heat setting Using residual heat 12 Cooking with the electronic boil start control All four hotplates have an electronic boil start control. It is no longer necessary to switch on the hotplate, wait for the pan to boil and then change the setting. You simply start with the heat setting you require for simmering. The hotplate initially heats up using the highest heat setting, and then automatically switches back to the heat setting selected. The time taken for the hotplate to heat up depends on the simmer setting selected. Setting procedure 1. Set the desired ongoing cooking level using the hotplate control, e. g. The electronic boil start control is activated. After bringing to the boil, the hotplate automatically switches back to ongoing cooking. Time restrictions To prevent the electronic boil start control from being operated inadvertently, it can only be switched on within 10 seconds of switching on the hotplate. If you wish to switch it on later: switch off the hotplate and reset the electronic boil start control. 2. Press the hotplate control. 13 Tables Refer to the following table for which appliances the electronic boil start control is suitable for. Touch the S symbol until the indicator light above the symbol lights up. This takes approximately 4 seconds (switch on time). The indicator light goes out after approximately 10 seconds. Touch the S symbol until the indicator light goes out. The following happens if you adjust a hotplate on a locked hob: A 0 flashes in the hotplate indicator, or the residual heat indicator flashes alternately with the 0. The indicator light above the S symbol lights up. The residual heat will still be displayed even if you have locked the hob. You can reduce the switch on time of the child proof lock from 4 to 1 seconds: The hotplates must be switched off. Unlocking Warning Locked hob Note Reducing the switch on time 1. [. . . ] You will find the address and telephone number of your nearest after sales service centre in the phone book. The after sales service centres listed will also be happy to advise you of a service point in your local area. E number and FD number Please quote the E number (product number) and the FD number (production number) of your appliance when contacting the after sales service. The rating plate bearing these numbers can be found in the appliance booklet. 22 Acrylamide in food Experts are currently discussing how dangerous acrylamide in food can be. [. . . ]